PDA

View Full Version : Vris Number 2 = no pull?

reallyniceguy
March 21st, 2006, 03:17 PM
I can feel the pull for vris number one opening but number two I dont, i checked and it is opening bugt i feel no pull. I HAD alot of vacuum leaks which i fixed after that i could feel second pull no more. Any ideas? is this normal? are u guys able to feel vris number 2?
mimmp
March 21st, 2006, 03:36 PM
If the #1 is working correctly the #2 should be an almost seamless transition. Disconnect the #1 and see if you notice it - it should be very obvious, then.
FirstGT
March 21st, 2006, 04:36 PM
do the paper test
RigsPGT
March 21st, 2006, 06:42 PM
Sometimes TPS adjustments can get that feeling back again! 0.57V on the digital meter gave me the pull from the 2nd VRIS but im fighting with idle.
pgt95
March 21st, 2006, 07:14 PM
yeah i went form a .50 tps to a .66 and my vris2 was almost as harsh as my s2000 vtec :lol:


Well maybe not THAT hard ;)
RigsPGT
March 21st, 2006, 07:21 PM
yeah i went form a .50 tps to a .66 and my vris2 was almost as harsh as my s2000 vtec :lol:


Well maybe not THAT hard ;)

.50V was the fan method on mine, excellent idle tho :(. Everytime i don't feel the kick from 2nd VRIS i get my meter and mess with TPS.:ohyeah:
WhiteDart
March 22nd, 2006, 06:09 PM
I dont feel mine really at all unless I im not quite at wot and pass 4250rpm then go wide open. I can definetly HEAR it though through my intake when it opens though.