Announcement

Collapse
No announcement yet.

*MBXmotorsports Powder Coating Services*

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by BarryG
    Is there a link out there to see the colors you've mentioned?
    BTW, I'm damned interested. I have a project car that's taken apart just begging to be colored.
    Barry

    We will have samples of each coating on our website soon!

    Comment


    • #32
      Originally posted by Mike Baxter
      We will have samples of each coating on our website soon!
      Well, at the moment I'm liking http://www.columbiacoatings.com/SilverVeinBlueTrans.jpg and http://www.columbiacoatings.com/candyorangeinake.jpg a lot, just not on the same motor at the same time. I think either would go with my teal green '93 GT. Or maybe http://www.columbiacoatings.com/candybluecloseup3.jpg. Or maybe http://www.columbiacoatings.com/Ebay...plewrench1.JPG
      Now this is interesting: http://www.eastwoodco.com/shopping/p...iProductID=395 or maybe an Emerald Iridescent.

      Barry
      Last edited by BarryG; August 11, 2004, 09:58 PM.
      Registered Probetalk Member #392.
      Co-founder of ALPOC. Formerly had '93 Rio Red GT, PRD STS-99, Bosch H4 lamps, Borla, Pilot 1055-c driving lamps. IT'S CRUNCHY!
      '93 Teal PGT. '94 black PSE. '91 PLX, 300k+ miles.

      Comment


      • #33
        Originally posted by BarryG
        Well, at the moment I'm liking http://www.columbiacoatings.com/SilverVeinBlueTrans.jpg and http://www.columbiacoatings.com/candyorangeinake.jpg a lot, just not on the same motor at the same time. I think either would go with my teal green '93 GT. Or maybe http://www.columbiacoatings.com/candybluecloseup3.jpg. Or maybe http://www.columbiacoatings.com/Ebay...plewrench1.JPG
        Now this is interesting: http://www.eastwoodco.com/shopping/p...iProductID=395 or maybe an Emerald Iridescent.

        Barry
        Hello Barry,

        We use Columbias line along with Eastwood's line and a few others. We also have custom colors and additives we can use on standard finishes for a true custom look and finish. Let us know if you need anything done

        Comment


        • #34
          Originally posted by Mike Baxter
          Hello Barry,

          We use Columbias line along with Eastwood's line and a few others. We also have custom colors and additives we can use on standard finishes for a true custom look and finish. Let us know if you need anything done
          Yep, I did an online search using Eastwood and Columbia from an earlier post by you. That's when I found those colors I linked to. I have a light teal green GT I'll be doing things to so I have to pick colors that won't clash with that.
          Barry
          Registered Probetalk Member #392.
          Co-founder of ALPOC. Formerly had '93 Rio Red GT, PRD STS-99, Bosch H4 lamps, Borla, Pilot 1055-c driving lamps. IT'S CRUNCHY!
          '93 Teal PGT. '94 black PSE. '91 PLX, 300k+ miles.

          Comment


          • #35
            what would you

            charge to do intercooler piping, 2.5inch diameter, about 6 pieces. FLAT BLACK powder?
            93 Mustang LX Coupe MS'nS. V3 029V
            302 with 70mm turbo, Yeah traction is an issue

            and my email address is not working.

            Comment


            • #36
              Originally posted by JUICEDSE
              charge to do intercooler piping, 2.5inch diameter, about 6 pieces. FLAT BLACK powder?

              PM'd, sent you a price you cant refuse

              Comment


              • #37
                Baxter! Got anything close to a "gun metal" type color? Also, how much would you charge me to powdercoat some 17x8.5" wheels a high-gloss black and either polish the lip, or coat it with a high gloss polished type color??

                Got any color examples?

                Let me know!

                --Adam
                2004 Ford Mustang GT - 4.6L V8 AT - Tuned - 3.73s - CAI

                Comment


                • #38
                  Originally posted by ProjectShadow
                  Baxter! Got anything close to a "gun metal" type color? Also, how much would you charge me to powdercoat some 17x8.5" wheels a high-gloss black and either polish the lip, or coat it with a high gloss polished type color??

                  Got any color examples?

                  Let me know!

                  --Adam

                  Hey Adam,

                  Here is a picture of Gunmetal on a Mailbox



                  Here is a picture of a powder that i think is really sweet for wheels:

                  Last edited by Mike Baxter; August 27, 2004, 08:09 AM.

                  Comment


                  • #39
                    Originally posted by Mike Baxter
                    Hey Adam,

                    Here is a picture of Gunmetal on a Mailbox
                    Adam LIKEY!

                    --Adam
                    2004 Ford Mustang GT - 4.6L V8 AT - Tuned - 3.73s - CAI

                    Comment


                    • #40
                      Originally posted by ProjectShadow
                      Adam LIKEY!

                      --Adam

                      Added another picture to the previous post of ours and also sent you a PM We are getting ready to do a set of 3rd Gen RX-7 Wheels in about 3 weeks in Gunmetal for Mike Lundberg. I'll take pics and get them posted. Let us know!

                      Comment


                      • #41
                        Ooooh, I like that a lot! SWEEET!

                        --Adam
                        2004 Ford Mustang GT - 4.6L V8 AT - Tuned - 3.73s - CAI

                        Comment


                        • #42
                          Originally posted by Mike Baxter
                          Added another picture to the previous post of ours and also sent you a PM We are getting ready to do a set of 3rd Gen RX-7 Wheels in about 3 weeks in Gunmetal for Mike Lundberg. I'll take pics and get them posted. Let us know!

                          how much this gonna run? just curious
                          Would love for pmo/pro to give me my 2000 veilside hyundai tiburon back and the several thousands of dollars they owe me or the parts!

                          Comment


                          • #43
                            I need to get my totally stripped and almost polished v6 IM powder coated. I very much like the Black Chrome.
                            With my IM, i started sanding it with a 400 grit, would I need to make the metal smoother in order to have a great finish on the top coat?
                            like if you were to do a completely stock Im... would the Black Chrome fill in the pits or would it match the pits and feel orangy or pitted?
                            1995 Mx6 LS

                            Comment


                            • #44
                              Originally posted by Mike Baxter
                              Hey Adam,

                              Here is a picture of Gunmetal on a Mailbox



                              Here is a picture of a powder that i think is really sweet for wheels:

                              HOLY HARD-ON!
                              Anthony D. Christiano

                              Comment


                              • #45
                                Originally posted by L-ucky-S-ix
                                I need to get my totally stripped and almost polished v6 IM powder coated. I very much like the Black Chrome.
                                With my IM, i started sanding it with a 400 grit, would I need to make the metal smoother in order to have a great finish on the top coat?
                                like if you were to do a completely stock Im... would the Black Chrome fill in the pits or would it match the pits and feel orangy or pitted?


                                The smoother you have the VC, the better the coating yes. Very small pits would go un-noticeable, large pits will be seen. Black chrome is becoming very very popular here at MBX

                                Comment

                                Working...
                                X