Advertise with ProbeTalk - click here to find out how!

Advertise with ProbeTalk - click here to find out how!
Advertise with ProbeTalk - click here to find out how! Forums Forums > Vendor Support and Contact > Former Vendors > PRM Racing

PRM Racing Looking for the BEST intake available? Look no further!

May 9th, 2008, 08:31 AM   #1
: Nov 2006
: 505
prm a vendor! since when?

whats goin on here. did Gerry finally cave and decide to join P.t.? also, who else has the new Prm intake?

May 14th, 2008, 10:39 PM   #2
PT Regular
: Feb 2008
: Auburn, CA
: 31
: 499
or has anyone seen pics?
White 95 GT Custom CAI, Custom Magnaflow.Dry n2o Soon

May 14th, 2008, 11:27 PM   #3
Obfuscatory & Abstruse Nomenclature
: Jan 2000
: Location: Location:
: 34,510
why did he have to "cave"?
Every Probe owner in CA is encouraged to attend! - Plan for it NOW!
May 15th, 2008, 05:06 AM   #4
Donating Member
: Dec 2004
: Wiscompton
: 33
: 7,566
why did he have to "cave"?
well to be honest... MR. Sica really didnt need PT or the expertise found here (outside of possibly being a good customer base) considering what hes done with his setup eseentially on his own...

but i understand how using 'cave in" might make PT seem like it has nothing worthwhile to offer which is obviously untrue

figured id shine some light on both reasonings

anyway, many of us are extremely happy that hes now a member... so much to learn yet!

& his product looks very innovative & worthy of looking into for a proven upgrade...

May 15th, 2008, 08:41 AM   #5
: Nov 2006
: 505
Geez......... why i used ''cave in'' is because I know him and I know he's not huge on some of the talk found in forums, and this statement is perfect example ''but i understand how using 'cave in" might make PT seem like it has nothing worthwhile to offer which is obviously untrue'' QUOTE, so maybe dont reword and misinterpret something someone says and turn it into something that it was not intended to be taken as guys and try to stay on topic. unbelievable........

with that stated, i want to know who else might have it, as i was the first to install the new PRM intake on a ze when i recieved it in March. i posted a write up on it in my local forum MPOC- manitoba probe owners club, and got nothing but flack from one of the local ''know it alls'' who just happens to be doing a traction bar bulk buy on here. he attempted to ridicule me on the fact that according to him we dont need another intake and a cheap ebay intake is good enough, and also that are vaf is a restriction! well that cheezed me off and i made my case there that our vaf should flow enough from what i understand to 250 hp, which the majority of us wont make n/a anyways.

it really just comes down to the best quality intake ive seen. having owned weapon r and the cheap ebay kind, i think the PRM sits at the perfect height and is an improvement in flow due to a slight in crease in size in the overall circumfrance of the flow inside the intake. its overall fitment like where it connects to the vaf and t.b. seem to be a better fit than most . also Gerry won an award from Sema with that filter design. my only problem was that being the first to put it on a ze stright neck was that i had to move my regulators and cut a bit of sharp plastic off the battery tray. i also put a peice of vac line over the clutch line so it wouldnt rub against the filter. after seeing my pics i sent to him, Gerry said he would change the bend to a... i think.... 105 degree vs the 90 elbow i have as i could not fit it with out taking off my cruise control. if anyones interested i d like to post a pic or two of the intake installed.

May 15th, 2008, 02:42 PM   #6
Dan [Sac]
Admiral General
: Feb 2000
: Nor*Cal
: 25,085
You're right on the VAF. I made 210 whp n/a through a stock VAF, which comes close to 250 crank hp.

- KLZE, fender-flared, right hand drive, 2350 lb fully loaded sex machine. ||

||- SOLD
93 PGT

- 10.24 @ 139.9 mph ||545 whp @ 20 psi ||



97 GTS - Rear Wheel Drive KLZE, 6-speed, 3.90 Torsen LSD, 2650 lb, daily driver! -

90 Ghettocet KLiata - forever WIP
May 20th, 2008, 02:03 PM   #7
Donating Member
: Nov 2005
: Midvale,UT
: 35
: 116
i bought 1 should be arriving next monday
May 31st, 2008, 12:27 PM   #8
Search Impaired
: May 2008
: 76
i'm here know

i really don't know the reason for not being a member, should of
joined years ago, maybe it was the got married had a baby
got divorced thing,woke up and smelled the exhaust!! i was
quite busy back then, but i'm here's cool, keeps me busy
at night, i do have alot of info to share on our motor,i'm only answering questions that are presented to me,no sence in telling everything i know
all at once. the true reason i'm here is to sell intakes, thats the sole reason
i biult the car not to mention i love what i do, the car gives me alot of satisfaction, i don't mind giving guy's info, but i also need the sales support,
the intake is truely a nice piece.i may design other product for the probe.
i also have clutches and aluminum flywheels for the probe , smokin prices !!
i will let every body know soon.

thanks !!

gerry sica

June 15th, 2008, 11:31 AM   #9
Juiced Member
: Aug 2004
: NewBrunswick Canada
: 36
: 852
Oooi Sweet Fidanza or Unorthodox? Or some thing of your own concoction.
June 21st, 2008, 03:33 AM   #10
Donating Member
: Nov 2005
: Midvale,UT
: 35
: 116
Gerry i should have pictures of my prm intake on thursday so expect a call from me

« | »
 is not affiliated in any way with the Ford Motor Company, the Mazda Motor Corporation, or any subsidiaries of either company.
All views and opinions expressed on this message board are those of the author and not the owners of