Tweet
This is from the fairly slight criticism I directed toward the two-piece trans bracket..
Mind you this person still remains secretive.. If you are gonna threaten me please let me know who you are.. Hopefully I will find a court case with your name on it soon enough..
SO, hopefully we will see $10 tranny brackets soon, YAY!
This is boring.. I can't believe anyone would take the time to do this, but I read it and if this person had half a brain they wouldn't have bothered and would have remained at least semi-civil about it and would have used their real name.
Lets see if this draws this loser out.
-----Original Message-----
From: u know [mailto:rocketman12345672000@yahoo.com]
Sent: Saturday, May 22, 2004 8:58 PM
To: Cyborgzero@cyborgzero.com
Subject: Transmission brace
>From sound of it you’re looking for me. People have
been telling me your pissed, I'm not sure why. It
really doesn’t matter. First, don't ever threaten me
with a lawyer or lawsuit; it does not intimidate me,
it pisses me off!
What it will do is cause me to do a "Bulk Buy" at my
material cost that's right I'll flood the market with
these braces for less than $10.00 each; you see I
don’t need to sell these brackets to stay in business.
I did not attack you; I did not attack your product.
You saw fit to discredit my abilities as a fabricator.
After you attacked my talents you went after my
morals, by calling me a thief. I don’t really care if
you have “prior art” on the brace, If you have not
done a patent search then you’re walking in quicksand.
I doubt you’re willing to spend the $5,000 it takes to
obtain a patent. I’ll wager you have not even taken
time to do a patent search. I already started a patent
search and have legal paperwork to back it up. If
you’re interested in buying my design that’s fine,
I’ll consider selling to you. If you don’t want my
design, this is how it’s going down. You will back off
or I’ll make it my life’s goal to attack every
component you market.
I can start with that libel statement about your roof
brace “strong enough to hold a 5 point harness” what
are you trying to do? Kill some kid with a fast car,
I’ll bet you did not perform a stress test or have a
stress engineer look at the design. That bar mounts
too high in the roof to handle the load applied on it
in a collision, the mass deceleration can multiply the
load of a two hundred pound man to ten times his
weight in a millisecond spike. That equates to 20,000
pounds of applied force that’s a hell of a lot more
that somebody doing chin-ups. Also the bar is so high
the 5 point will go slack under a rollover condition.
A lawyer will have a good time burning your butt in
court when some distraught mother buries her son
because of a faulty part.
So it’s your choice, BACK OFF or find out you mouthed
Off at the wrong person.
Mind you this person still remains secretive.. If you are gonna threaten me please let me know who you are.. Hopefully I will find a court case with your name on it soon enough..
SO, hopefully we will see $10 tranny brackets soon, YAY!
This is boring.. I can't believe anyone would take the time to do this, but I read it and if this person had half a brain they wouldn't have bothered and would have remained at least semi-civil about it and would have used their real name.
Lets see if this draws this loser out.
-----Original Message-----
From: u know [mailto:rocketman12345672000@yahoo.com]
Sent: Saturday, May 22, 2004 8:58 PM
To: Cyborgzero@cyborgzero.com
Subject: Transmission brace
>From sound of it you’re looking for me. People have
been telling me your pissed, I'm not sure why. It
really doesn’t matter. First, don't ever threaten me
with a lawyer or lawsuit; it does not intimidate me,
it pisses me off!
What it will do is cause me to do a "Bulk Buy" at my
material cost that's right I'll flood the market with
these braces for less than $10.00 each; you see I
don’t need to sell these brackets to stay in business.
I did not attack you; I did not attack your product.
You saw fit to discredit my abilities as a fabricator.
After you attacked my talents you went after my
morals, by calling me a thief. I don’t really care if
you have “prior art” on the brace, If you have not
done a patent search then you’re walking in quicksand.
I doubt you’re willing to spend the $5,000 it takes to
obtain a patent. I’ll wager you have not even taken
time to do a patent search. I already started a patent
search and have legal paperwork to back it up. If
you’re interested in buying my design that’s fine,
I’ll consider selling to you. If you don’t want my
design, this is how it’s going down. You will back off
or I’ll make it my life’s goal to attack every
component you market.
I can start with that libel statement about your roof
brace “strong enough to hold a 5 point harness” what
are you trying to do? Kill some kid with a fast car,
I’ll bet you did not perform a stress test or have a
stress engineer look at the design. That bar mounts
too high in the roof to handle the load applied on it
in a collision, the mass deceleration can multiply the
load of a two hundred pound man to ten times his
weight in a millisecond spike. That equates to 20,000
pounds of applied force that’s a hell of a lot more
that somebody doing chin-ups. Also the bar is so high
the 5 point will go slack under a rollover condition.
A lawyer will have a good time burning your butt in
court when some distraught mother buries her son
because of a faulty part.
So it’s your choice, BACK OFF or find out you mouthed
Off at the wrong person.
just reading that makes me scared. And you should be too. i mean an unknown citizen threatning you. I think hes serious y0. id watch my back if i were you
Comment