If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Is there a link out there to see the colors you've mentioned?
BTW, I'm damned interested. I have a project car that's taken apart just begging to be colored.
Barry
We will have samples of each coating on our website soon!
Registered Probetalk Member #392.
Co-founder of ALPOC. Formerly had '93 Rio Red GT, PRD STS-99, Bosch H4 lamps, Borla, Pilot 1055-c driving lamps. IT'S CRUNCHY!
'93 Teal PGT. '94 black PSE. '91 PLX, 300k+ miles.
We use Columbias line along with Eastwood's line and a few others. We also have custom colors and additives we can use on standard finishes for a true custom look and finish. Let us know if you need anything done
We use Columbias line along with Eastwood's line and a few others. We also have custom colors and additives we can use on standard finishes for a true custom look and finish. Let us know if you need anything done
Yep, I did an online search using Eastwood and Columbia from an earlier post by you. That's when I found those colors I linked to. I have a light teal green GT I'll be doing things to so I have to pick colors that won't clash with that.
Barry
Registered Probetalk Member #392.
Co-founder of ALPOC. Formerly had '93 Rio Red GT, PRD STS-99, Bosch H4 lamps, Borla, Pilot 1055-c driving lamps. IT'S CRUNCHY!
'93 Teal PGT. '94 black PSE. '91 PLX, 300k+ miles.
Baxter! Got anything close to a "gun metal" type color? Also, how much would you charge me to powdercoat some 17x8.5" wheels a high-gloss black and either polish the lip, or coat it with a high gloss polished type color??
Got any color examples?
Let me know!
--Adam
2004 Ford Mustang GT - 4.6L V8 AT - Tuned - 3.73s - CAI
Baxter! Got anything close to a "gun metal" type color? Also, how much would you charge me to powdercoat some 17x8.5" wheels a high-gloss black and either polish the lip, or coat it with a high gloss polished type color??
Got any color examples?
Let me know!
--Adam
Hey Adam,
Here is a picture of Gunmetal on a Mailbox
Here is a picture of a powder that i think is really sweet for wheels:
Last edited by Mike Baxter; August 27, 2004, 08:09 AM.
Added another picture to the previous post of ours and also sent you a PM We are getting ready to do a set of 3rd Gen RX-7 Wheels in about 3 weeks in Gunmetal for Mike Lundberg. I'll take pics and get them posted. Let us know!
Added another picture to the previous post of ours and also sent you a PM We are getting ready to do a set of 3rd Gen RX-7 Wheels in about 3 weeks in Gunmetal for Mike Lundberg. I'll take pics and get them posted. Let us know!
how much this gonna run? just curious
Would love for pmo/pro to give me my 2000 veilside hyundai tiburon back and the several thousands of dollars they owe me or the parts!
I need to get my totally stripped and almost polished v6 IM powder coated. I very much like the Black Chrome.
With my IM, i started sanding it with a 400 grit, would I need to make the metal smoother in order to have a great finish on the top coat?
like if you were to do a completely stock Im... would the Black Chrome fill in the pits or would it match the pits and feel orangy or pitted?
I need to get my totally stripped and almost polished v6 IM powder coated. I very much like the Black Chrome.
With my IM, i started sanding it with a 400 grit, would I need to make the metal smoother in order to have a great finish on the top coat?
like if you were to do a completely stock Im... would the Black Chrome fill in the pits or would it match the pits and feel orangy or pitted?
The smoother you have the VC, the better the coating yes. Very small pits would go un-noticeable, large pits will be seen. Black chrome is becoming very very popular here at MBX
Comment