Advertise with ProbeTalk - click here to find out how!



Advertise with ProbeTalk - click here to find out how!
Advertise with ProbeTalk - click here to find out how!

ProbeTalk.com Forums

  ProbeTalk.com Forums > Performance Section > 2nd Gen (93-97) I4 2.0L Performance > 2nd Gen (93-97) I4 2.0L Performance Archive

2nd Gen (93-97) I4 2.0L Performance Archive Quality Archived Posts and FAQs

 
 
July 9th, 2008, 12:45 AM   #1
M.Hicks
Supercharged Member
 
 
: Aug 2002
: Omnipresent
: 5,412
Post FS Engine Specs 93-03

FS Engine Specifications
93-97 FS
Horsepower: 118 @ 5500 RPM
Torque(lbs/ft): 127 @ 4500 RPM
Displacement Volume: 2.0L / 1991cc / 121.5ci
Cylinder Configuration: Inline-Four(I4)
Type: 4 Stroke Otto Cycle
Bore: 83mm / 3.268"
Stroke: 92mm / 3.622"
Bore:Stroke Ratio: 0.902 Undersquare(Torque Biased)
Rod:Stroke Ratio: 1.467 Poor(Torque Biased)
Rod Length: 135mm / 5.315"
Compression Ratio: 9.0:1
Induction Type: Natural
Intake Manifold: Single Stage | Long Runners(Torque Biased)
Valvetrain: DOHC 16 Valve | Hydralic Lash Adjustment | Timing Belt
Valve/Valveseat Angle: 45/45
Intake Cam: FS01
Exhaust Cam: FS01
Ignition Type: Distributor
Fuel System: Multipoint EFI
Fuel Injector Rate: 220ml/min
Manual Transmission Type: G15M-R | 4.105 Final | Open

98-03 FS-DE
Horsepower: 130 @ 6000 RPM
Torque(lbs/ft): 135 @ 4000 RPM
Displacement Volume: 2.0L / 1991cc / 121.5ci
Cylinder Configuration: Inline-Four(I4)
Type: 4 Stroke Otto Cycle
Bore: 83mm / 3.268"
Stroke: 92mm / 3.622"
Bore:Stroke Ratio: 0.902 Undersquare(Torque Biased)
Rod:Stroke Ratio: 1.467 Poor(Torque Biased)
Rod Length: 135mm / 5.315"
Compression Ratio: 9.1:1
Induction Type: Natural
Intake Manifold: Dual Stage VICS | VTCS(Protege)
Intake Manifold: Single Stage | Medium Length Runners(626)
Valvetrain: DOHC 16 Valve | Direct Shim Over Tappet Actuation | Timing Belt
Intake Cam: FSD7
Exhaust Cam: FSD7
Ignition Type: Distributor-less Coil Pack
Fuel System: Multipoint EFI
Fuel Injector Rate: 285ml/min
Manual Transmission Type: G15M-R | 4.105 Final | Open

2001 MP3 FS-DE
Horsepower: 140 @ 6000 RPM
Torque(lbs/ft): 142 @ 4500 RPM
Factory Tuned ECU: Advanced Ignition Timing(Requires Premium Fuel)
Axle-Back Exhaust: Manufactured by Racing Beat(2.375")
Revised VICS Intake Manifold: Mazda VTC System Removed(Hindered Intake Velocity)

2003 MSP FS-DET
Horsepower: 170 @ 6000 RPM
Torque(lbs/ft): 160 @ 3500 RPM
Co-Engineer: Callaway Cars
Turbocharger: Garrett T-25 | 6psi-9max | Internal Wastegate
Exhaust Manifold: Callaway Log-Style Turbo-Manifold
Axle-back Exhaust: Manufactured by Racing Beat(2.375")
By-Pass/Blow-Off Valve: Modified FD RX7 Unit
Intercooler: Turbo Diesel 323 | Air-to-Air
Radiator: Turbo Diesel 323 | Air-to-Coolant
Oil Cooler: Water Cooled
Transmission: G15M-R | 4.105 Final | 2-way LSD
Release Bearing and Clutch Pivot Fork: Upgraded

99-03 FS-ZE
Horsepower: 168 @ 6800 RPM
Torque(lbs/ft): 131 @ 5000 RPM
Compression Ratio: 10.4:1
Intake Manifold: Revised VICS | High Performance(FS-ZE)
Intake Cam: FSH9
Exhaust Cam: FSD7

2001 MSF FS-ZE
Horsepower: 173 @ 6800 RPM
Torque(lbs/ft): 134 @ 5000 RPM
Units Produced: 209
Compression Ratio: 10.7:1
Exhaust Manifold: 4-2-1 MazdaSpeed Header
Muffler: MazdaSpeed Sport Sound
Flywheel: MazdaSpeed Chromoly Lightened
Intake Cam: FSH9
Exhaust Cam: FS9P

99-00 1.8L FP-DE
Horsepower: 122 @ 6000 RPM (US/Can) / 133 @ 6200 RPM(Japan) / 113 @ 6000 RPM(Euro)
Torque(lbs/ft): 120 @ 4000 RPM (US/Can) / 117 @ 4500 RPM (Japan) / 117 @ 4000 RPM (Euro)
Available in Japan: 92-01
Displacement: 1839cc
Bore: 83mm
Stroke: 85mm
Bore:Stroke Ratio: 0.9765 Square(No Bias)
Rod:Stroke Ratio: 1.52 Good(No Bias)
Rod Length: 129.2mm / 5.087"
Compression Ratio: 9.1:1(US/Can) / 9.1:1(Japan) / 9.7:1(Euro)
Fuel injector rate: 235ml/min
Transmission: F25M-R(US/Can) / G25MX-R(Japan) / F25M-R(Euro)
Intake Cam: FP39
Exhaust Cam: FP47

Misc.
Piston Interchangeability:
FS-DE 9.1:1
FS-DE 9.7:1 (9.1:1 when used with FP-DE)
FS-ZE 10.4:1 (9.7:1 when used with FP-DE)
FS-ZE 10.7:1

Bore:Stroke Ratio:
X ≤ 0.94 = Undersquare(Torque Bias)
0.95-1.04 = Square(No Bias)
X ≥ 1.05 = Oversquare(Power Bias)

Rod:Stroke Ratio:
X ≤ 1.49 = Poor(Torque Bias)
1.5-1.624 = Average(No Bias)
1.625-1.74 = Good(Power Bias)
X ≥ 1.75 = Superb
__________________
Matt Hicks
Silver 97 2.0 Turbo
Factory Green ZX6RR
If you have 1,000 posts and have not donated to PT, you should consider doing so.
"We're all still learning."

 
 

« | »










ProbeTalk.com is not affiliated in any way with the Ford Motor Company, the Mazda Motor Corporation, or any subsidiaries of either company.
All views and opinions expressed on this message board are those of the author and not the owners of ProbeTalk.com.