Corner Store Forums Rules - PLEASE READ this and the stickies!

UPDATED: Changes have been made, effective 1 Nov 2010, and are in RED

The general WTB forum has been REINSTATED and REOPENED!

Rules for the Corner Store forums:
  • No E-bay links - if you want to sell something here, sell it. This is not an auction house.
  • No feeler threads - again, if you want to sell something, sell it.
  • No soliciting sales through the PM system. If you are caught doing this, you will be dealt with accordingly.
  • If you are selling something, include either a fixed price or the lowest acceptable price.
  • Please use a descriptive thread title. If you post in the For Sale forum, please add a FS: tag to whatever it is you're selling.
  • Please add state tags in all thread titles in the CS, No one is excluded from this.
  • Post in the CORRECT forum. Miscellaneous items belong in that forum. The For Sale forum is strictly for Probe/MX-6/MX-3/626 related items.
  • If you have multiple items for sale, list them in ONE thread!
  • Only Authorized PT Vendors may post new threads in the Vendor For Sale forum. This is to facilitate easily finding the Vendors sale threads.
  • Any parts sellers must now include a picture of the parts they are selling, along with something showing their screen name and alongside the item they're selling
  • Anyone who takes an unreasonable amount of time to deliver goods or pay for those goods will be UNCONDITIONALLY BANNED PERMANENTLY.
  • The ONLY way to reverse this is to make good on your commitment and then both seller and buyer contact me to lift the ban.
  • Anyone banned and reinstated for failing to deliver/pay for goods will not be allowed back into the Corner Store.
  • "Reasonable time" means not more than 15 days after a deal has been reached, unless the parties involved have made prior arrangements.
  • The minimum number of posts required to view the Corner Store is 15.
  • Lastly, no *bump* posts. This is frowned upon and we look at it in the same light as 'free post'. DO NOT DO IT!

These rules were not meant to be all-inclusive, however with the amount of time spent trying to work them out, these are the best set of rules that we felt should be documented and made readily available for the members and to provide a point of reference for the staff in case they are approached with any questions.

The rules for the Corner Store are always up for review and revision as necessary.

To clarify a few things regarding advertising: when the board was first created, we did not seek sponsorships of any kind. As the board grew, it became necessary to seek out and secure sponsors for the site in order to help growth of the site and to maintain/upgrade the server on which it sat. Any additional funds were used to acquire site items that were made available for sale and to help provide funding for meets the site would help sponsor or sponsor entirely.

We have done our best to remain outside of the vendor/customer relationship. We have never tried to push any sort of vendor or product to our membership, as it has often been alluded to in the past, we have taken this stance so that we would not be perceived as 'playing favorites. We think it has worked well and our members have been able to speak their minds freely, however as with most sites, there have been some members who have taken this to the extreme and felt that they were entitled to do so.

As a result, this means that we will continue to implement a policy on non-sponsor advertisements and general spam. We will not hinder discussion of competing websites or their products as long as it is relevant to the discussion at hand, however general spamming or promotion of competing sites or of non-sponsored vendors or products cannot be allowed. To allow this would do a disservice to the vendors/sponsors who have given their time and resources to help make this site available to everyone.

An example of a relevant discussion would be regarding throttle bodies, intake manifolds, or suspension items. Yes, it would be okay to mention who manufactured the item and what the benefits of the product would be vs. another manufacturer's product. It would NOT be okay to mention where to purchase them if they are NOT an Authorized PT Vendor or site sponsor.

Another example would be using the private messaging system to circumvent the advertising rules. A last example are signature links. Only Authorized PT Vendors are allowed to have links to their website or to any other Vendor site. There are NO exceptions. Any violator may or may not be warned if they are in violation.

A final example would be lurking through the For Sale forum for potential customers if you are someone who is operating a salvage business. By salvage business, we mean that you are a person or agent of a company who deals in the salvage parts trade. This could mean someone who frequents the local salvage yards, picks up whatever parts are available, then comes onto the board looking to sell them. This is a means of using a free service to promote your business and that is considered unauthorized advertising.

We ask for your understanding in our need to take these steps for the betterment of our community. These changes should not affect most of the membership, except in a good way. If you've had a good experience with a sponsor, by all means, let others know; if your experience wasn't so good, we ask that you let others know of this as well. This is what the feedback system is for and we encourage everyone to use it.

Our operating procedures will always be independent of any vendor or product and we will always listen to suggestions that any member might have.
See more
See less

[VA] 1994 Manual PGT for Sale

  • Filter
  • Time
  • Show
Clear All
new posts

  • [VA] 1994 Manual PGT for Sale

    I am getting ready to sell my 1994 Probe GT with 5 speed manual. It's time for me to upgrade to something more family friendly so I'm looking to find her a good home. PM me with any questions. I will post more pictures when I have time.

    Here's the basic info:
    I am the original owner, I even have the original window sticker to go along with it
    Well cared for and mostly garage kept it's entire life
    Just under 170,000 miles
    Recently had timing belt, water pump, etc. replaced
    Runs great, no codes, good tires, no accidents and clean title.
    Teal Mist Metalic color
    Sunroof, AC/ ABS/Airbags
    grey cloth interior
    paint is in good shape except for a clearcoat blemish on part of the spoiler.

    Along with the car I have a slew of spare parts and tools to go along with it (full set of shop manuals, hoses, alternator, distributor, spare wheels, car cover, engine diagnostic connector, PM me if you want a list)

    Car is located in Yorktown Virginia and I am looking to sell as early as next month (dependent on getting my replacement car in soon). I'd love to find someone who can take care of her, if you are looking for a beater car please look elsewhere.

    I am asking $2900 OBRO for everything (including all my spare parts, etc.)

    Last edited by jason281; May 8, 2022, 10:25 AM.

  • #2
    Here's a list of the main parts that come with the car:

    Breakout box adapter T92C-600-AH
    Timing advance light
    Ford service manual
    Ford electrical and vacuum troubleshooting manual
    Ford wiring diagrams
    Ford powertrain/emissions diagnosis 1994 service manual
    Hayes repair manual

    Parts - new or rebuilt
    Exhaust header gasket
    Car cover - exact fit
    Clutch slave cylinder rebuild kit
    Distributor cap
    Intake vacuum reservoirs
    Ford OEM shifter knob (leather) x2
    VRIS solenoid
    Air filter
    Rubber air intake tubes
    Crankshaft plug set

    Parts - good condition
    Clock spring with switches
    Front license plate bracket
    K&n filter
    Wheels - x2

    Spare Parts (some may need refurb for use)
    Right rear caliper
    Radiator reservoir
    Clutch slave cylinder
    Ignition wire set
    Intake airflow sensor
    Oil pump
    Timing belt tensioner
    Water pump
    Distributor cap and rotor
    Fan motors x2
    Crankshaft position sensor
    Ignition switch
    Ford OEM cd stereo

    Junkyard pulls
    Misc relays, solenoids
    Headlight motors

    Here are some additional images.


    • #3
      That color is really nice. GLWS!
      My 93GT, Wendy - the oldest second gen Probe in the U.S. still on the road.

      Forever in search of Enkei Shoguns.


      • #4
        Thanks! Hoping to find her a good home!


        • #5
          May be a player in the near future. Our work has been laid off more than we have worked so far this year. I work at the plant these were built at. I will keep this in mind for sure. Hopefully this chip shortage stuff straightens out!
          1995 Probe GT - N2O Ingested, CM 3, fidanza, headers, exhaust, CAI, MS, kenwood sound
          2010 Ram 1500 4x4 - Daily Driver
          99 Mustang V6 stock inherited not sure what the plan is


          • #6
            Originally posted by Level 9 View Post
            May be a player in the near future. Our work has been laid off more than we have worked so far this year. I work at the plant these were built at. I will keep this in mind for sure. Hopefully this chip shortage stuff straightens out!
            Sorry to hear about all the lay offs! I hope things turn around soon, this chip shortage is ridiculous.

            Look me up if things stabilize for you, I have no idea how long it will take to sell this yet.


            • #7
              Thank you. For sure I'll definitely keep an eye and checking back. I'm in Michigan also do I would have to either pick it up or find a carrier. I'll keep in the loop tho.
              1995 Probe GT - N2O Ingested, CM 3, fidanza, headers, exhaust, CAI, MS, kenwood sound
              2010 Ram 1500 4x4 - Daily Driver
              99 Mustang V6 stock inherited not sure what the plan is


              • #8
                Sold the car this past week to someone who will take good care of her. Thanks for the interest everyone!