Corner Store Forums Rules - PLEASE READ this and the stickies!

UPDATED: Changes have been made, effective 1 Nov 2010, and are in RED

The general WTB forum has been REINSTATED and REOPENED!

Rules for the Corner Store forums:
  • No E-bay links - if you want to sell something here, sell it. This is not an auction house.
  • No feeler threads - again, if you want to sell something, sell it.
  • No soliciting sales through the PM system. If you are caught doing this, you will be dealt with accordingly.
  • If you are selling something, include either a fixed price or the lowest acceptable price.
  • Please use a descriptive thread title. If you post in the For Sale forum, please add a FS: tag to whatever it is you're selling.
  • Please add state tags in all thread titles in the CS, No one is excluded from this.
  • Post in the CORRECT forum. Miscellaneous items belong in that forum. The For Sale forum is strictly for Probe/MX-6/MX-3/626 related items.
  • If you have multiple items for sale, list them in ONE thread!
  • Only Authorized PT Vendors may post new threads in the Vendor For Sale forum. This is to facilitate easily finding the Vendors sale threads.
  • Any parts sellers must now include a picture of the parts they are selling, along with something showing their screen name and alongside the item they're selling
  • Anyone who takes an unreasonable amount of time to deliver goods or pay for those goods will be UNCONDITIONALLY BANNED PERMANENTLY.
  • The ONLY way to reverse this is to make good on your commitment and then both seller and buyer contact me to lift the ban.
  • Anyone banned and reinstated for failing to deliver/pay for goods will not be allowed back into the Corner Store.
  • "Reasonable time" means not more than 15 days after a deal has been reached, unless the parties involved have made prior arrangements.
  • The minimum number of posts required to view the Corner Store is 15.
  • Lastly, no *bump* posts. This is frowned upon and we look at it in the same light as 'free post'. DO NOT DO IT!

These rules were not meant to be all-inclusive, however with the amount of time spent trying to work them out, these are the best set of rules that we felt should be documented and made readily available for the members and to provide a point of reference for the staff in case they are approached with any questions.

The rules for the Corner Store are always up for review and revision as necessary.

To clarify a few things regarding advertising: when the board was first created, we did not seek sponsorships of any kind. As the board grew, it became necessary to seek out and secure sponsors for the site in order to help growth of the site and to maintain/upgrade the server on which it sat. Any additional funds were used to acquire site items that were made available for sale and to help provide funding for meets the site would help sponsor or sponsor entirely.

We have done our best to remain outside of the vendor/customer relationship. We have never tried to push any sort of vendor or product to our membership, as it has often been alluded to in the past, we have taken this stance so that we would not be perceived as 'playing favorites. We think it has worked well and our members have been able to speak their minds freely, however as with most sites, there have been some members who have taken this to the extreme and felt that they were entitled to do so.

As a result, this means that we will continue to implement a policy on non-sponsor advertisements and general spam. We will not hinder discussion of competing websites or their products as long as it is relevant to the discussion at hand, however general spamming or promotion of competing sites or of non-sponsored vendors or products cannot be allowed. To allow this would do a disservice to the vendors/sponsors who have given their time and resources to help make this site available to everyone.

An example of a relevant discussion would be regarding throttle bodies, intake manifolds, or suspension items. Yes, it would be okay to mention who manufactured the item and what the benefits of the product would be vs. another manufacturer's product. It would NOT be okay to mention where to purchase them if they are NOT an Authorized PT Vendor or site sponsor.

Another example would be using the private messaging system to circumvent the advertising rules. A last example are signature links. Only Authorized PT Vendors are allowed to have links to their website or to any other Vendor site. There are NO exceptions. Any violator may or may not be warned if they are in violation.

A final example would be lurking through the For Sale forum for potential customers if you are someone who is operating a salvage business. By salvage business, we mean that you are a person or agent of a company who deals in the salvage parts trade. This could mean someone who frequents the local salvage yards, picks up whatever parts are available, then comes onto the board looking to sell them. This is a means of using a free service to promote your business and that is considered unauthorized advertising.

We ask for your understanding in our need to take these steps for the betterment of our community. These changes should not affect most of the membership, except in a good way. If you've had a good experience with a sponsor, by all means, let others know; if your experience wasn't so good, we ask that you let others know of this as well. This is what the feedback system is for and we encourage everyone to use it.

Our operating procedures will always be independent of any vendor or product and we will always listen to suggestions that any member might have.
See more
See less

New/Used, Rare/Common, Stock/Performance parts

  • Filter
  • Time
  • Show
Clear All
new posts

  • New/Used, Rare/Common, Stock/Performance parts

    Selling a number of parts for KL powered PGT's. Some are interchangeable with MX6. Some parts are used and a few are new. Some parts are common and others are VERY rare. Some parts are stock and some parts are performance. All prices are shipped to the lower 48 states. Discounts are available for purchases of 2 or more items. Reasonable offers will be considered.

    1) Used Alternator- $55 shipped
    2) 2 used OBD2 distributors/caps/rotors- $75 shipped each
    3) Used starter- $55 shipped
    4) New OBD2 distributor cap- $20 shipped
    5) 96-97 black surround center reflector- $65 shipped
    6) Used stock gauge cluster- $25 shipped
    7) Used rear motor mount with poly inserts- $40 shipped
    8) 2 used front motor mounts with poly inserts- $35 shipped each
    9) 2 passenger and 1 drivers door cap- $75 shipped each
    10) 97 5-speed ECU- $80 shipped
    11) Used aftermarket? spoiler with 3rd brake light- $150 shipped
    12) ZE cams- SOLD
    13) Millenia fender flares (slight damage in pictures)- Lets discuss
    14) Used 93 Probe steering column- GONE
    15) Used passenger fender cap (mount is broken)- $30 shipped
    16) Like new Ferrea titanium keepers, retainers, dual spring valve springs, and SS valves- $900 shipped
    17) Corksport Lip with optional bumper- Let's discuss
    18) Millenium Sideskirts- SOLD

    Pictures are available upon request, as this is a bunch of shit!
    Last edited by proboner; January 16, 2018, 11:09 PM.
    Beautiful Beast- 1997 PGT in process of becoming an SC/NA Beast...
    Elo- 1990 BMW 325i weekend car
    Brunhilde- 2003 BMW Z4 3.0 6-speed daily driver
    The Beast- Sleeping in the junkyard...

  • #2
    Hi, I am interested in the ZE cams. Would you mind shipping to France?


    • #3
      I'm interested in the Ferrea parts but it wouldn't be until spring when the MN construction season starts back up and will have the funds lol
      93 PGT-ZE-Turbo project
      94 PGT-all stock and sexy
      95 PGT-ZE -Supercharged
      2012 Honda Accord-daily driver


      • #4
        well if they're still around in the spring they're yours!
        Beautiful Beast- 1997 PGT in process of becoming an SC/NA Beast...
        Elo- 1990 BMW 325i weekend car
        Brunhilde- 2003 BMW Z4 3.0 6-speed daily driver
        The Beast- Sleeping in the junkyard...


        • #5
          Interested in the lip.
          Would love for pmo/pro to give me my 2000 veilside hyundai tiburon back and the several thousands of dollars they owe me or the parts!


          • #6
            I'm interested in the ferrea components as well. But I vaguely recall on your build thread that you bought them from a member here and they were damaged...or they were packaged crappy or something. May not even be the same thing I'm thinking of, just wanted to check.


            • #7
              Do you still have the cams?
              1995 pgt (first car)-totaled at 173xxx R.I.P
              1994 v6 mustang-sold
              1995 pgt-Stage 2 clutch, EGR delete, STS, Driver mod?
              2014 Dodge Charger RT awd- Uber DD!!!!!!!!(Stolen, parted, totaled)
              2002 BMW 330I DAS UBERMACHT!!!!!


              • #8
                Hey everyone. I don't check the FS section super frequently, so if you're interested in something feel free to send me a PM!

                To answer the last couple questions:

                Lip is still available and 1slowblackze has been pm'd

                Ferrea valvetrain is still available, completely undamaged, and panic37 has been pm'd

                unfortunately the ZE cams have been sold... sorry drizztser
                Last edited by proboner; January 16, 2018, 11:08 PM.
                Beautiful Beast- 1997 PGT in process of becoming an SC/NA Beast...
                Elo- 1990 BMW 325i weekend car
                Brunhilde- 2003 BMW Z4 3.0 6-speed daily driver
                The Beast- Sleeping in the junkyard...


                • #9
                  any pics of the CS lip?
                  93 PGT
                  94 PGT
                  95 PGT
                  07 MS6


                  • #10

                    that's what I could easily find on my computer. Let me know if there's anything specific you want to see...
                    Beautiful Beast- 1997 PGT in process of becoming an SC/NA Beast...
                    Elo- 1990 BMW 325i weekend car
                    Brunhilde- 2003 BMW Z4 3.0 6-speed daily driver
                    The Beast- Sleeping in the junkyard...


                    • #11
                      pics of fender flares?
                      95 PGT Current project
                      95 PSE swapped in 93 KL...Headers.... K&N cold Air.... Gutted Caged and ready for Dirt
                      01 Seabring Convert 01 Neon Rims With Spacers..
                      99 Olds Cutlas DD


                      • #12
                        Originally posted by fordprobegt67 View Post
                        pics of fender flares?