Announcement

Collapse

Corner Store Forums Rules - PLEASE READ this and the stickies!

UPDATED: Changes have been made, effective 1 Nov 2010, and are in RED

The general WTB forum has been REINSTATED and REOPENED!


Rules for the Corner Store forums:
  • No E-bay links - if you want to sell something here, sell it. This is not an auction house.
  • No feeler threads - again, if you want to sell something, sell it.
  • No soliciting sales through the PM system. If you are caught doing this, you will be dealt with accordingly.
  • If you are selling something, include either a fixed price or the lowest acceptable price.
  • Please use a descriptive thread title. If you post in the For Sale forum, please add a FS: tag to whatever it is you're selling.
  • Please add state tags in all thread titles in the CS, No one is excluded from this.
  • Post in the CORRECT forum. Miscellaneous items belong in that forum. The For Sale forum is strictly for Probe/MX-6/MX-3/626 related items.
  • If you have multiple items for sale, list them in ONE thread!
  • Only Authorized PT Vendors may post new threads in the Vendor For Sale forum. This is to facilitate easily finding the Vendors sale threads.
  • Any parts sellers must now include a picture of the parts they are selling, along with something showing their screen name and ProbeTalk.com alongside the item they're selling
  • Anyone who takes an unreasonable amount of time to deliver goods or pay for those goods will be UNCONDITIONALLY BANNED PERMANENTLY.
  • The ONLY way to reverse this is to make good on your commitment and then both seller and buyer contact me to lift the ban.
  • Anyone banned and reinstated for failing to deliver/pay for goods will not be allowed back into the Corner Store.
  • "Reasonable time" means not more than 15 days after a deal has been reached, unless the parties involved have made prior arrangements.
  • The minimum number of posts required to view the Corner Store is 15.
  • Lastly, no *bump* posts. This is frowned upon and we look at it in the same light as 'free post'. DO NOT DO IT!

These rules were not meant to be all-inclusive, however with the amount of time spent trying to work them out, these are the best set of rules that we felt should be documented and made readily available for the members and to provide a point of reference for the staff in case they are approached with any questions.

The rules for the Corner Store are always up for review and revision as necessary.

To clarify a few things regarding advertising: when the board was first created, we did not seek sponsorships of any kind. As the board grew, it became necessary to seek out and secure sponsors for the site in order to help growth of the site and to maintain/upgrade the server on which it sat. Any additional funds were used to acquire site items that were made available for sale and to help provide funding for meets the site would help sponsor or sponsor entirely.

We have done our best to remain outside of the vendor/customer relationship. We have never tried to push any sort of vendor or product to our membership, as it has often been alluded to in the past, we have taken this stance so that we would not be perceived as 'playing favorites. We think it has worked well and our members have been able to speak their minds freely, however as with most sites, there have been some members who have taken this to the extreme and felt that they were entitled to do so.

As a result, this means that we will continue to implement a policy on non-sponsor advertisements and general spam. We will not hinder discussion of competing websites or their products as long as it is relevant to the discussion at hand, however general spamming or promotion of competing sites or of non-sponsored vendors or products cannot be allowed. To allow this would do a disservice to the vendors/sponsors who have given their time and resources to help make this site available to everyone.

An example of a relevant discussion would be regarding throttle bodies, intake manifolds, or suspension items. Yes, it would be okay to mention who manufactured the item and what the benefits of the product would be vs. another manufacturer's product. It would NOT be okay to mention where to purchase them if they are NOT an Authorized PT Vendor or site sponsor.

Another example would be using the private messaging system to circumvent the advertising rules. A last example are signature links. Only Authorized PT Vendors are allowed to have links to their website or to any other Vendor site. There are NO exceptions. Any violator may or may not be warned if they are in violation.

A final example would be lurking through the For Sale forum for potential customers if you are someone who is operating a salvage business. By salvage business, we mean that you are a person or agent of a company who deals in the salvage parts trade. This could mean someone who frequents the local salvage yards, picks up whatever parts are available, then comes onto the board looking to sell them. This is a means of using a free service to promote your business and that is considered unauthorized advertising.

We ask for your understanding in our need to take these steps for the betterment of our community. These changes should not affect most of the membership, except in a good way. If you've had a good experience with a sponsor, by all means, let others know; if your experience wasn't so good, we ask that you let others know of this as well. This is what the feedback system is for and we encourage everyone to use it.

Our operating procedures will always be independent of any vendor or product and we will always listen to suggestions that any member might have.
See more
See less

WTB probe diff ring gear

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WTB probe diff ring gear

    hey guys,

    I'm NOT after the 4.388 ring gear. =D

    Ideally just the ring gear and not the rest of the diff as I'm in Australia and don't really want to get a whole diff shipped over.

    perfect if anyone has a busted probe diff =)

    So to note, I am in Australia postcode 2903 to be exact.

    thanks =)
    Last edited by daevilone; June 16, 2011, 05:03 PM. Reason: found it doesnt work =(
    Daily - 1992 MX6 -- White, KLZE/DE IM, Koni Adjustables, full leather interior, CAI, 16x8 BBS RS, I/H/E
    Race -1992 MX6 -- White, KLZE, Colt 218 cams, Gutted/Ported/Polished DE IM, MFactory LSD, interprep springs, 9lb flywheel, I/H/E, sway bars, strut bars, JSPEC heads/fogs, Selex coilovers. Coming: MSIIv3

  • #2
    You sure you want a 4.38? It won't mate up with mx6 gears, fyi.
    1993 Mercury tRacer :Vitara & mFactory: was my #1
    1994 Mercury TrAcer Wagon : '02 SPI swap : the loaner
    2001 Hyundai Accent 2.0L-T3 swaphas flat pots
    2014 Factory Five 818s EJ255t :it's adorable
    2000 Lotus esprit v8TT : under the knife 2018
    2003 Pathfinder 200k miles : The daily
    No I do not Uber any of these

    Comment


    • #3
      it wont? first I've heard of that but I guess it does make sense. hrmmm I swear i read somewhere that you could change them.

      arent the gear ratios identical between the two? But it does make sense that a larger ring wouldn't fit.
      Daily - 1992 MX6 -- White, KLZE/DE IM, Koni Adjustables, full leather interior, CAI, 16x8 BBS RS, I/H/E
      Race -1992 MX6 -- White, KLZE, Colt 218 cams, Gutted/Ported/Polished DE IM, MFactory LSD, interprep springs, 9lb flywheel, I/H/E, sway bars, strut bars, JSPEC heads/fogs, Selex coilovers. Coming: MSIIv3

      Comment


      • #4
        after rereading the massive transmission thread there appears to be no reason why the internals from any g series box aren't swappable in any configuration you want. That whole thread was about which gears from which box people wanted.

        So is there any proof that it doesnt fit? That thread suggests that it does but I obviously don't want to buy anything if it's not going to fit.
        Daily - 1992 MX6 -- White, KLZE/DE IM, Koni Adjustables, full leather interior, CAI, 16x8 BBS RS, I/H/E
        Race -1992 MX6 -- White, KLZE, Colt 218 cams, Gutted/Ported/Polished DE IM, MFactory LSD, interprep springs, 9lb flywheel, I/H/E, sway bars, strut bars, JSPEC heads/fogs, Selex coilovers. Coming: MSIIv3

        Comment


        • #5
          the ring gear AND the pinion gear are a set....you have to have matching gears or it won't turn properly.
          '94 teal w/black int. some sort of sts, 65mm DE TB full KL31 ZE, CAI, Phenolyc spacers, mx3 flywheel, pacesetter headers, 2.5" exhaust, stainless brake lines, MS and LC-1. Charter member Club 15.2 - Mustang Dyno - 187/169 @the wheels
          '90 White GT "Pearl"....uh ohzzzz...I had turboz. Now with T3....now it's J-doggs
          '96 SE & '93 "Red-Eye" smashed and trashed. 97 GTS....crashed, not trashed yet

          Comment


          • #6
            <----- I was like you, clueless, so I tried it and I couldn't close the 2 halves of the case again. I guess facts are greater then theories. So had to find a PGT tranny to use my custom LSD. Glad I caught this in time, I read your sig and 4.38 and it raised a flag.
            Last edited by mac1; June 16, 2011, 01:16 PM.
            1993 Mercury tRacer :Vitara & mFactory: was my #1
            1994 Mercury TrAcer Wagon : '02 SPI swap : the loaner
            2001 Hyundai Accent 2.0L-T3 swaphas flat pots
            2014 Factory Five 818s EJ255t :it's adorable
            2000 Lotus esprit v8TT : under the knife 2018
            2003 Pathfinder 200k miles : The daily
            No I do not Uber any of these

            Comment


            • #7
              Haha, yep clueless :-).

              Thanks for that, I guess I'll drive with this one till it breaks then get a pgt one =).


              So I guess this thread it's now redundant.
              Daily - 1992 MX6 -- White, KLZE/DE IM, Koni Adjustables, full leather interior, CAI, 16x8 BBS RS, I/H/E
              Race -1992 MX6 -- White, KLZE, Colt 218 cams, Gutted/Ported/Polished DE IM, MFactory LSD, interprep springs, 9lb flywheel, I/H/E, sway bars, strut bars, JSPEC heads/fogs, Selex coilovers. Coming: MSIIv3

              Comment

              Working...
              X