This thread is dedicated to roughly answer the question, "How much power does my car make?" Many people post up asking, "How much power does such and such mod make?" or "I have done [these mods] how much hp does my car make?"
Before you start posting it would be good to know what modifications you have on your car and other details of your car as follows:
-Year (e.g. 1995)
-Make and Model (e.g. Ford Probe GT)
-Transmission (MTX or ATX)
-Mileage on engine (e.g. 59k miles)
-Type of engine (KLDE/03, KLZE, FS03, Hybrid [03 block ZE head], custom, etc.)
-Power mods only (e.g. KLZE, AFPR, fuel pressure settings, CAI, headers [brand included], exhaust [piping size], port and polishing, nitrous [brand and shot], turbo or S/C, chips, stand alone, etc.)
-Other misc parameters (temp and humidity during testing, ignition timing [if known], wheel size, etc)
-Brand of Dynomometer (Mustang or DynoJet usually...Mustang dynos will produce numbers ~10-15% less than a comparable DynoJet Dyno for the same car)
-Elevation of the city where you dyno'd (Data can be found here--> www.city-data.com )
If you have a dyno plot scanned in that would be great. Just link it into the post. Images unfortunately cannot be added inline in this forum. In case your picture goes down, be sure to type in the wheel horse power and wheel torque (wtq=ft-lbs) you got on your dyno so that we know what you got even without the pic. For example, whp=135.5 wtq=133.8
Lastly, do not post up the following:
-guesses as to what you think your car can do on a dyno
-no G-Tech results
-no fake dynos
-no discussion posts
-no arguements
If you want to discuss a dyno, the poster may add a small dyno explanation, but any further dyno discussion should be done in a separate thread.
The more dyno runs that you can include the better.
Before you start posting it would be good to know what modifications you have on your car and other details of your car as follows:
-Year (e.g. 1995)
-Make and Model (e.g. Ford Probe GT)
-Transmission (MTX or ATX)
-Mileage on engine (e.g. 59k miles)
-Type of engine (KLDE/03, KLZE, FS03, Hybrid [03 block ZE head], custom, etc.)
-Power mods only (e.g. KLZE, AFPR, fuel pressure settings, CAI, headers [brand included], exhaust [piping size], port and polishing, nitrous [brand and shot], turbo or S/C, chips, stand alone, etc.)
-Other misc parameters (temp and humidity during testing, ignition timing [if known], wheel size, etc)
-Brand of Dynomometer (Mustang or DynoJet usually...Mustang dynos will produce numbers ~10-15% less than a comparable DynoJet Dyno for the same car)
-Elevation of the city where you dyno'd (Data can be found here--> www.city-data.com )
If you have a dyno plot scanned in that would be great. Just link it into the post. Images unfortunately cannot be added inline in this forum. In case your picture goes down, be sure to type in the wheel horse power and wheel torque (wtq=ft-lbs) you got on your dyno so that we know what you got even without the pic. For example, whp=135.5 wtq=133.8
Lastly, do not post up the following:
-guesses as to what you think your car can do on a dyno
-no G-Tech results
-no fake dynos
-no discussion posts
-no arguements
If you want to discuss a dyno, the poster may add a small dyno explanation, but any further dyno discussion should be done in a separate thread.
The more dyno runs that you can include the better.
Comment