Announcement

Collapse
No announcement yet.

Coil on plug conversion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Coil on plug conversion

    Does anyone know where i can find a decent coil on plug or any sort of coil pack write up for the kl?
    ive searched and cant really find anything with parts / part numbers and a complete write up.
    mx3, ze swap, SS autochrome headers, 2.5 inch exhaust, custom made CAI, AWR motor mounts, interprep valve springs, n/a 218 race grind colt cams, street PnP, thermal spacers.

  • #2
    Later model Mazda 626 with the KLG4 variant had the Ford EDIS system, which was a coil pack with 3 coils that mounted in the spot the distributor used to be. These work off a 36-tooth trigger wheel, pretty easy to find still, easy setup if your are going to MegaSquirt. Otherwise supposedly Honda CBR1000 COP (not certain of years) will fit, would still want the 36-tooth wheel to use with Megasquirt.

    Also fun fact, the Kia variant of the 1.8 Miata engine used a hall-effect cam position sensor that is the right diameter for the KLDE/KLZE heads. Am going to see if I am handy enough to attach a trigger magnet on the camshaft and have a full-sequential setup.

    Comment

    Working...
    X

    Debug Information