Announcement

Collapse
No announcement yet.

KLZE install.... help?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    KLZE install.... help?

    Is there anyone who can help me with a KLZE install? I am not to familiar with it and was hoping for someone who has done it already and figured out all the vaccuum lines to help as well.

    I have a new built ZE and also a LSD tranny. waiting for install but can't do it myself. I don't have a location to do it, but i do have an engine hoist that I could bring somewhere. Anybody with feedback or help would be appreciated.

    I have looked for shops or someone to do it but sadly the guy who said he'd help hasnt' been online for almost a month so I can't really keep waiting. I would try and compensate for the help or I'd be willing to give all my aftermarket parts I have plus some money for the help.

    I have Sensei V 2 sideskirts, Sensei V2 rear bumper, Phenolic spacers for throttle body, Two DE intake manifolds, Red underglows, 4 swirlies(non chromed) extra oil pan, stock rio red hood, stock ground effects for GT. I would give it all plus maybe 200 dollars or work out a deal for money for the help. Let me know if there are any takers.

    AIM - BHSBRI800
    Brian
    Tags: None
  • #2
    might want to start with where you're located.... Ive never heard of "Brewster"
    <Insert lame vehicle specs here>

    Comment

    • #3
      I want none of it, just tell me when and where and make sure you have a lift.
      Anthony D. Christiano

      Comment

      • #4
        you shouldn't have to pay $$ or give away parts, normally all that is required is that you feed your help!

        good luck!
        '06 Subaru Legacy 2.5GT Spec.B - BNR HTA68 on E85
        '93 Volkswagen Corrado SLC VR6
        '06 Acura RSX type S - daily driver

        Comment

        • #5
          Well Brewster, NY is about an hour north of New York City lying right on the Connecticut Border. It actually has two major highways intersecting... 684 and 84. I am more than willing to feed thepeople hat help me, I just don't know anyone that can help who is around me. i'd appreciate any help though. I have everything needed i just don'thave hethe knowledge for it.

          How long does it usually take? a few days like a whole wekend right?

          I'll even buy some beer :-P

          Domino81, What days are you free? I won't be able to start till around mid august but aside from that i'll have the engine, lift and food + beer.
          Last edited by BHSBRI800; July 16, 2007, 02:46 PM.

          Comment

          • #6
            i could possibly be persuaded. unlike these kind f$%$^,i'm a little more of the greddy natured. i've driven by brewster a couple of times on my way to conn. to pick up/trade probes. there's a few people closer to you,dons93pgt,austin,if he hasnt moved...
            Last edited by tour96se; July 16, 2007, 03:54 PM.
            93gt 230k dd.
            1993 probe gt
            96 pgt 135k dd
            http://i86.photobucket.com/albums/k1...100_3918-1.jpg

            Comment

            • #7
              ahh, NYC would be quite the drive... You may want to try North East. Most of NYPOC is upstate/
              <Insert lame vehicle specs here>

              Comment

              • #8
                Originally posted by Domino81
                I want none of it, just tell me when and where and make sure you have a lift.
                and make sure you have 911 on speeddial
                and austin will rape you for you parts.

                There are alot od people in jersey and L.I that are much closer. good luck man
                94Gt Ze Rio red,afpr,borla, sts,EIBACHS
                ,gray->black int, mx6 leather,
                need rio red sideskirts yesterday
                Ze isnt rice its from JAP its a rice eater
                My car is finally in the garage again

                Comment

                • #9
                  Id try NEPO... Those people would be closer to you....
                  93 PGT-ZE-T<---- Yes T as in turbo.
                  89 PGT

                  Comment

                  • #10
                    NEPO might be the way to go... I'm from MAPOC (part of NEPO) and we have members in CT that might not be too far of a drive for you. There will probably be a meet to install my ZE, and we might be able to combine meets and put yours in too but that would be about a 3 hour drive for you and i couldn't meet up since my Probe is a shell.
                    00 Silver Mustang GT - Not Stock, 60k miles. Stock Dyno - 222rwhp 256rwtq.
                    93 Black PGT MTX Codename: "Skunky" - 219k miles, White GTS Stripes, KLZE engine, 40k mile trans, Hotshot Headers, Random Tech High-Flow Cat, Hotshot Cold Air Intake, RR-Racing STS, RR Racing Poly Front Mount and Shift Stabilizer Arm Bushings, etc. etc.
                    95 Black PGT ATX - Stock, 85k miles, gone./95 Black PGT MTX - Shell, going

                    Comment

                    • #11
                      Thanks for all the help guys. it's really appreciated. I'll see if I can put a post up in NEPO to get better feedback. Thanks again.

                      Ferant.... when are you meeting up to do the KLZE swap? Because i'd certianly be interested in coming. I don't mind how far it is away because its worth the drive just to relax and also chill with other owners. Always love driving anyway. my car is in ohio getting painted right now, so i can't do much until about the second week of august.

                      Comment

                      • #12
                        Originally posted by BHSBRI800
                        Thanks for all the help guys. it's really appreciated. I'll see if I can put a post up in NEPO to get better feedback. Thanks again.

                        Ferant.... when are you meeting up to do the KLZE swap? Because i'd certianly be interested in coming. I don't mind how far it is away because its worth the drive just to relax and also chill with other owners. Always love driving anyway. my car is in ohio getting painted right now, so i can't do much until about the second week of august.
                        No idea when we're doing the meet. Last time I talked to Jeff and Jason, who kind of head MAPOC they said we ussually take summer's off from meets due to vacations and conflicting schedules. I will hopefully have my ZE ordered soon, then try to get the meet between end of August, beginning of October. And if your Probe is the one JP is working on now, can't wait to see it finished.
                        00 Silver Mustang GT - Not Stock, 60k miles. Stock Dyno - 222rwhp 256rwtq.
                        93 Black PGT MTX Codename: "Skunky" - 219k miles, White GTS Stripes, KLZE engine, 40k mile trans, Hotshot Headers, Random Tech High-Flow Cat, Hotshot Cold Air Intake, RR-Racing STS, RR Racing Poly Front Mount and Shift Stabilizer Arm Bushings, etc. etc.
                        95 Black PGT ATX - Stock, 85k miles, gone./95 Black PGT MTX - Shell, going

                        Comment

                        • #13
                          Yeah i am pretty excited to see what JP is going to do. So far from what I've seen with his work, I am going to be amazed. He does an amazing paint job and a very cool guy to work with. I'm hoping that maybe by showing the car off, who knows, maybe there will be more people driving to Ohio hehe.

                          I love Jp's car though. Getting ideas for my turbo setup from his :-P He's been sick though. that would be really cool to be able to meet up and just have an engine swap meet. That would be awesome. I'd defiently chip in for food and beer like woah!

                          Comment

                          Previous template Next
                          Working...
                          X