I are bored. My ever changing mods...

[WhiteDart]

Looking great Jim! Is it time for a TNPOC reunion BBQ yet?

There is still a couple of us left. Chris will be putting a shell back together soon, were doing a mtx swap on Memphis' MX6 next month, and Josh is slowly working on getting his probe back on the road. You should swing by some time.

[WhiteDart]

I was thinking about doing something similar with my Probe, specifically, mounting the radiator underneath the car. Have you noticed an improvement in the coolant temperatures?

The rear rad definitely helps alot but I dont think im going to leave it as a permanent solution. I switched to a smaller front mount intercooler but it still blocks too much airflow. It would probably be fine if I didnt also have the AC condenser in the way of the rad. There just isnt a tremendous amount of open arear in a stock probe bumper and im and very reluctant to cut it up. The plan now is to try a water to air intercooler because the heat exchanger can be way thinner than any fmic.

[mx64life]

There is still a couple of us left. Chris will be putting a shell back together soon, were doing a mtx swap on Memphis' MX6 next month, and Josh is slowly working on getting his probe back on the road. You should swing by some time.

Dad and I both should!!! I'll make it a point too, I have weekends free now a days. I can't believe Memphis is drivingggg.

I'd drive the Talon, the new setup made it around Rod Run for 2 hours the other weekend but then I swapped to a new ignition system and well, it's got a nasty misfire when I went to test with the nitrous. So going over some stuff with that hopefully in time for some events coming up.