Announcement

Collapse
No announcement yet.

Future Product Ideas - Tell me what your looking for!!

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Future Product Ideas - Tell me what your looking for!!

    Hey Guys!

    We are finally getting all sorted out on our end here, with getting our business up and running. Needless to say, we are ready to start making some new stuff!!!

    We have a few new ideas we are working on now, but I will save those for later .

    So, this leads us to the question... What would you guys like to see for the Ford Probe

  • #2
    LCA Bushings for 2g's? shifter bushings.
    Last edited by nstyPSE; January 12, 2009, 01:31 AM.
    1993 Ford Probe - CAI, Side exit exhaust, Darkstar mounts, HEI.

    Comment


    • #3
      A chassis bushing kit would be most welcome by all of us,I'm sure. The guys at energy suspensions (in cali) told me to bring it out,& they'd see if they could put something together,but I'm in Ohio. Still workin on gettin my ride in condition for long distance drives to start with. But this is something we def need. Along with replacement wiring harnesses. Wires wear out after 10-20 years of use,simply from how electricity moves through them. Anyway,the bushing kit should be more doable for now...


      '94 PROBE SE Middle-aged croozr

      Comment


      • #4
        +1 for the chassis bushing kit!
        Built by Ford.....Engineered by Mazda....
        Rebuilt, Re-engineered, and Redefined by Kov.
        New Probe in 2013, let the S/C fun begin!

        Comment


        • #5
          2.5 V6 pulley kit (power steering, water pump, alternator).

          Definitely a suspension kit, which is applicable to all 93-97 probes - a rear kit at the least, since for now we have the SuperPro option for the front. If you can do a full car kit, you can increase your income on that.


          Edit - add some front camber plates (pillow ball mount) that can work with stock or Tokico struts, and possibly steering rack bushings.
          Last edited by Dan [Sac]; January 12, 2009, 11:26 AM.
          90 Mazda 323 - KLZE, fender-flared, right hand drive, 2350 lb fully loaded sex machine. || Pic Thread ||- SOLD
          93 PGT FRANKENPROBE - 10.24 @ 139.9 mph ||545 whp @ 20 psi || Timeslip || Dyno slip|| Build Thread - GONE
          97 GTS - Rear Wheel Drive KLZE, 6-speed, 3.90 Torsen LSD, 2650 lb, daily driver! - Build Thread - GONE
          90 Ghettocet KLiata - forever WIP

          Comment


          • #6
            +1 on the camber plates,& poly steering rack bushings. Good thoughts as well.


            '94 PROBE SE Middle-aged croozr

            Comment


            • #7
              Originally posted by nstyPSE View Post
              LCA Bushings for 2g's? shifter bushings.

              Is there a short shifter option for the 2g's?

              Originally posted by Kov View Post
              +1 for the chassis bushing kit!
              This might be a stupid question

              How many total bushings are there on this car?

              Originally posted by Dan [Sac] View Post
              2.5 V6 pulley kit (power steering, water pump, alternator).

              Definitely a suspension kit, which is applicable to all 93-97 probes - a rear kit at the least, since for now we have the SuperPro option for the front. If you can do a full car kit, you can increase your income on that.


              Edit - add some front camber plates (pillow ball mount) that can work with stock or Tokico struts, and possibly steering rack bushings.

              I can look into a pulley kit
              Last edited by darkstarmotorsp; January 12, 2009, 09:12 PM. Reason: Automerged Doublepost

              Comment


              • #8
                RWD bolt in swap.
                or a FWD w/ LSD that bolts in that won't explode.

                Comment


                • #9
                  There are a few short shifter selections for the 2gs. RR-Racing, pacesetter, civic sts, PA. There are a bunch.
                  1993 Ford Probe - CAI, Side exit exhaust, Darkstar mounts, HEI.

                  Comment


                  • #10
                    I'll have to go over it & get back to you on the #,location of any other bushings in the car. But there are F & R control arms to start with. The rear control arms mount in the center with camber adjuster bolt assemblies that would be great to find a good replacement for. There's another bushing where it mounts to the knuckle. Steering rack bushings,F/R sway bar bushings,R torsion bars have 2 bushings each...


                    '94 PROBE SE Middle-aged croozr

                    Comment


                    • #11
                      Originally posted by Dan [Sac] View Post
                      2.5 V6 pulley kit (power steering, water pump, alternator).

                      Definitely a suspension kit, which is applicable to all 93-97 probes - a rear kit at the least, since for now we have the SuperPro option for the front. If you can do a full car kit, you can increase your income on that.


                      Edit - add some front camber plates (pillow ball mount) that can work with stock or Tokico struts, and possibly steering rack bushings.

                      +1 pulley KIT
                      MAD MED PGT-ZE
                      KLZE Block & Custom Titanium ZE built Heads,Boared TB,Colt Tri-Flow Cams, Custom Cat Back, Pacesetter Headers,CAI,Short throw shifter, Custom Quaiffe LSD transaxle, Tranny saver,Traction Bars,FD flywheel,Centerforce Clutche,Kosei K1's 13.6lb Wheels,GTS seats & Black Interior,Millennia S Injectors,MEGA Squirt!!

                      Comment


                      • #12
                        resonated test pipes for 2G (bolt on for 97's too would be really cool.)

                        I don't think JJ makes em anymore.
                        Last edited by troyfromkamilla; January 13, 2009, 02:34 PM.
                        97PGT - CAI - HEI - SSAC - TP - B&M STS

                        Comment


                        • #13
                          pulley kit for sure!! b pillar bar, good quality front strut bar,tubular rear control arms
                          93gt 230k dd.
                          1993 probe gt
                          96 pgt 135k dd
                          http://i86.photobucket.com/albums/k1...100_3918-1.jpg

                          Comment


                          • #14
                            A tranny that can keep up with my driving style
                            The come back kid
                            96 Ford Probe Turboed 12.202 @ 118.74 R.I.P
                            97 Mx-6 all motor 13.7 @ 98 parted out
                            88 Mx-6 Turbo Classic 14.5@93 SOLD
                            93 323 hatchV6 turbo! To be announced

                            Comment


                            • #15
                              +1 Pulley Kit

                              And a Lightweight Stock Crank Pulley

                              2.25" stainless exhaust, Headers, CAI, AWR mounts, B&M Short Throw, Jacobs Pro-street, Front/Rear Strut brace, clear corners, Colt 210/210, Interprep valve springs, Aasco flywheel, CM IIR clutch, ZE IM, phenos

                              Comment

                              Working...
                              X