welcome aboard. they offer lightweight pulley sets and solid motor mounts for the probe/mx-6/626 and other mazda and ford vehicles.
Announcement
Collapse
No announcement yet.
Welcome Darkstar Motorsports to PT!
Collapse
X
-
Cool hopefully they will have lots to offer the probe and mx6 community.. Im always looking for bigger and better things for my pgt1995 turbocharged pgt with countless mods.. check it out here
http://www.supermotors.net/registry/20602
1993 turbocharged pgt daily driver check it out here..
http://www.supermotors.net/registry/20602/73905
-
welcome to probetalk guys.
Originally posted by dmark101 View Postwelcome aboard. they offer lightweight pulley sets and solid motor mounts for the probe/mx-6/626 and other mazda and ford vehicles.
This mount uses an 70A hot pour urethaneLast edited by LowClassCC; January 2, 2009, 06:35 PM.
Comment
-
Originally posted by LowClassCC View Postcorrection on the above statement (please dont throw me in the hole ) the mounts for the probe that they have are not solid mounts.
ProbeTalk is BACK! Once again, it's what you use the Internet for!
Let's get DANGEROUS!
Comment
-
The Mounts Seem almost exact to the V6....im not sure if they are the same or not but they look just like my Mounts on my GT
Wondering if the Pulley Kit for the 1.8 V6 would be the same pulleys used on the 2.5L V6
Same goes for the Crank Pulley?
2.25" stainless exhaust, Headers, CAI, AWR mounts, B&M Short Throw, Jacobs Pro-street, Front/Rear Strut brace, clear corners, Colt 210/210, Interprep valve springs, Aasco flywheel, CM IIR clutch, ZE IM, phenos
Comment
-
Originally posted by t_masters View PostThe Mounts Seem almost exact to the V6....im not sure if they are the same or not but they look just like my Mounts on my GT
Wondering if the Pulley Kit for the 1.8 V6 would be the same pulleys used on the 2.5L V6
Same goes for the Crank Pulley?
Comment
-
On the rear motor mount designed for the 93-97 probe, what year was it designed to? the reason I ask is because if it was designed off a 93, you will have fitment issues on all 94+ probes because the change of the rear motor mount transmission bracket.96PGTZE~GREDDY~MAGNAFLOW~ACT
FIDANZA~WILWOOD~AWR~RR-RACING~HS~OUTLAW
PRD~MSD-WINDOWS~TEIN-SS~RX-8~ALPINE
Comment
-
Originally posted by darkstarmotorsp View Postafter looking at you signature that you have AWR, then they might be the same. which mount s look the same to you? I haven't looked at a V6 probe moutns latley
Again - Will any of the pulleys work on the 2.5 V6?
Originally posted by unknowncitizen View PostOn the rear motor mount designed for the 93-97 probe, what year was it designed to? the reason I ask is because if it was designed off a 93, you will have fitment issues on all 94+ probes because the change of the rear motor mount transmission bracket.
2.25" stainless exhaust, Headers, CAI, AWR mounts, B&M Short Throw, Jacobs Pro-street, Front/Rear Strut brace, clear corners, Colt 210/210, Interprep valve springs, Aasco flywheel, CM IIR clutch, ZE IM, phenos
Comment
Comment