Announcement

Collapse
No announcement yet.

1994 Ford probe gt build thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1994 Ford probe gt build thread

    Sup PT? Like to introduce myself and my build thread. I'm new to the forums and fairly new to the ford probe community. This thread will be all about my midnight purple ford probe gt . I picked this car up for $500 with a wrecked front end, shattered windshield and when the airbags deployed it destroyed the dash :/.

    It has 103k miles on it and already came with a lot of maintenance done to it. New brakes, radiator, transmission, clutch, wires and plugs, distributor and oil change. Car drove just fine in the condition I bought it other than the cosmetic damage so I thought it was a steal. I already had a white 96 pgt that I gave up on because of a wiring nightmare with a kill switch installed by previous owner so I just used it for parts for this one.

    I swapped over the hood, front bumper, front radiator support, headlights, black dash (old one was black and grey), steering wheel and shift linkage (the one on the purple probe was sloppy). I also bought a great condition hatch from the jy since the original was missing the spoiler and had holes in it.

    Current mods:

    Engine/Exhaust/Fuel:
    -Gates timing belt and water pump kit (Not installed)
    -Klg4 intake manifold and throttle body(not installed)
    Ngk spark plugs and wires(not installed)
    -King6 hei mod harness(not installed)
    -J20a vitara pistons (not installed)
    -Milly S rods (not installed)
    -Oem rod bearings (not installed)
    -Performance Valve springs (not installed)
    -arp head studs and bolts kit (not installed)
    -walbro 255 fuel pump (not installed)
    -Synapse bov with flange(not installed)
    -Tial sport wastegate (not installed)
    -Gates blue belt (not installed)
    -Borg Warner Gm-5 turbo (not installed)
    -Precision 6176e turbo (not installed)
    -Mazda Rx7 fd primary injectors (not installed)
    -Mazda Rx7 fd secondary injectors (not installed)
    -Cxracing Turbo manifold (not installed)
    -Kl47 throttle body (not installed)
    -3" 1320 performance Dual blast pipes x2 (not installed)
    -Vibrant high flow cat 3" (not installed)
    -Vibrant resonator 3" (not installed)
    -Mishimoto M line intercooler (not installed)
    -Universal 3" intercooler piping kit (not installed)
    -Megasquirt pnp2 (not installed)
    -Melling oil pump (not installed)
    -Oil/Fuel line kit -6an (not installed)


    Transmission:
    -Mfactory rebuild kit (not installed)
    -Mx3 Flywheel (not installed)

    Brakes:
    -Mazdaspeed 6 Front calipers, rotors and brake pads (Not installed)
    -Mazda 626 Rear calipers, rotors and brake pads (Not installed)
    -TechnaFit stainless brake lines (Not installed)
    -Brand new brake cables right and left. Raybestos and Dorman brand(not installed)

    Wheels/Tires:
    -Stock aluminum wheels wrapped in Cooper Zeons 225/60/16
    -Jnc 016 gold wheels 18x9.5 +25 (Sold)
    -Aodhan ds01 vacuum gold w/chrome rivets 18x10.5 +22(Sold)
    -Nankang ns 20 (245/40/18) (Sold)
    -Sickspeed Purple lug nuts with .50 Cal gold caps(not installed)
    -5mm spacers(not installed)
    -hubcentric rings 73.1 to 67.1(not installed)
    -S&M bullet style valve caps(sold)
    -Weds Kranze Borphes custom built (in progress)

    Suspension:
    -New oem rear mounts (Sold)
    -Universal front camber plates (Sold)
    -Yonaka coilovers (Sold)
    -Stance coil springs 9k front 150mm 8k rear 150mm (Sold)
    -Megan racing adjustable lateral links and trailing arms (Not installed)
    -Awr rear sway bar kit (Not installed)
    -King6 sway bar adapter (Not installed)

    Ice:
    -Sony Mex-N5100BT head unit
    -All new pioneers all the way around

    Interior:
    -Jdm sport steering wheel (Purple/Black) (Sold)
    -Grip Royal steering wheel (Plum crazy/gold chrome painted center) (Not installed)
    -Grip royal gold chrome crest (Not installed)
    -Nrg rose gold pyramid quick release (Not installed)
    -Nrg 10th anniversary quick release (Purple) (Sold)
    -Nrg Hub (Black)
    - Megan Racing STS
    -Stance Drift knob (Purple) (Selling)
    -Slammedenuff Still Hood shift knob (Purple/Blue Flakes)

    Exterior:
    -S2000 mugen style front lip PU(selling)
    -hid kit(selling)
    -Universal side skirts with winglets(not installed)
    -Extreme dimensions Universal sniper spoiler(not installed)

    Thanks for looking! I'll keep everybody updated on my build. Hope everyone enjoys.

    ---------- Post added at 12:48 AM ---------- Previous post was at 12:46 AM ----------



    ---------- Post added at 12:49 AM ---------- Previous post was at 12:48 AM ----------

    Last edited by Stanced4lyfe; December 27, 2017, 09:07 PM.

  • #2



    This is my probe and I hope to create a unique one and I'm glad to be a new member of ProbeTalk.
    Last edited by Stanced4lyfe; July 26, 2017, 04:42 PM.

    Comment


    • #3
      Which s2000 lip? Never heard of this before.
      1994 Project PGT

      M62 In Progress...

      Comment


      • #4
        Originally posted by Brizzy View Post
        Which s2000 lip? Never heard of this before.
        It's a trial and error. I'll do what I can to cut trim to make it fit but it suits the body kit I'm going for.

        Here is the link for it. http://m.ebay.com/itm/04-09-Honda-S2...ATCHING_ACTIVE

        I'll let you know how it goes.

        Comment


        • #5
          Did you ever test fit the wheels you have? I love the color and style, but would be a nightmare to keep clean on a daily. I'm sub'd to see how the new wheels fit, please slam it!

          Comment


          • #6
            Originally posted by n8r View Post
            Did you ever test fit the wheels you have? I love the color and style, but would be a nightmare to keep clean on a daily. I'm sub'd to see how the new wheels fit, please slam it!
            Naw I never did. I'm currently selling my jnc 016 wheels as I've bought the new ones. That is the plan to slam and be turbod lol don't worry I'll try my best not to disappoint.

            Comment


            • #7
              why the s2k lip? just wanna try something different?
              id be curious to see the ds01s on it. Ive thought about going with the gold but still thinking getting some 3pc and rebuilding them.
              93 PGT
              94 PGT
              95 PGT
              07 MS6

              Comment


              • #8
                tl;dr I almost ****ing hate the stanced bull shit, and your gear shifter is ridiculous like a porn star dildo ridiculous, but I always appreciate hard work done well and rather like your choice of wheels, very classy. If that's your flavor I predict the car will turn out looking pretty awesome.
                Last edited by dillinr; March 24, 2016, 10:40 PM.
                Ryan
                '94 Mazda MX6 V-6
                SMF Prep:
                MFactory LSD [] TEIN [] 15x11's and 275 Hoosiers [] Hawk HP+ [] Sparco [] AWR [] HotShot [] Headers [] Magnaflow [] Side Exit []

                Comment


                • #9
                  ^^ I think he mentioned ditching the shift knob
                  1994 Project PGT

                  M62 In Progress...

                  Comment


                  • #10
                    Oh good. Or, whatever, it's your style, I don't care how much I ****ing hate it, as long as you own it I'll applaud it.

                    Besides, who the **** am I to judge, $20k into an old car and it still makes only 150whp.
                    Ryan
                    '94 Mazda MX6 V-6
                    SMF Prep:
                    MFactory LSD [] TEIN [] 15x11's and 275 Hoosiers [] Hawk HP+ [] Sparco [] AWR [] HotShot [] Headers [] Magnaflow [] Side Exit []

                    Comment


                    • #11
                      Originally posted by ZE-Infused View Post
                      why the s2k lip? just wanna try something different?
                      id be curious to see the ds01s on it. Ive thought about going with the gold but still thinking getting some 3pc and rebuilding them.
                      Yeah something different and the body kit I'm going with matches the lines. I can't wait til they get here I want to see then so bad lol ups says next Wednesday. What wheels?

                      Originally posted by dillinr View Post
                      tl;dr I almost ****ing hate the stanced bull shit, and your gear shifter is ridiculous like a porn star dildo ridiculous, but I always appreciate hard work done well and rather like your choice of wheels, very classy. If that's your flavor I predict the car will turn out looking pretty awesome.
                      Lol alot of people hate it and alot of people love it. Unfortunately for me I love it and I've already had a stanced ef hatch. I've also been told that about the shift knob. I've replaced it already lol. Thank you though sir much appreciated.

                      Originally posted by Brizzy View Post
                      ^^ I think he mentioned ditching the shift knob
                      Yes I already did.

                      Originally posted by dillinr View Post
                      Oh good. Or, whatever, it's your style, I don't care how much I ****ing hate it, as long as you own it I'll applaud it.

                      Besides, who the **** am I to judge, $20k into an old car and it still makes only 150whp.
                      Lol its alright man its your car and your money you do what you want. I appreciate all builds. People work hard to get there car how they like it but in the car scene now a days some people will hate it with a passion some will actually like it alot.

                      Comment


                      • #12
                        Pictures of the new shift knob



                        Tires came in yesterday too.

                        Last edited by Stanced4lyfe; July 26, 2017, 05:00 PM.

                        Comment


                        • #13
                          You couldn't pay me to run another set of Nankang tires
                          1995 Probe GT. Colt 218* cams, Tein SS Coilovers with EDFC, K6F trailing arms, CZT traction bars, ZE Intake Manifold, Milly MAF/OBDII swap, GReddy SP1, Probe Addiction Strut braces, RX8 Seats, PRD STS, PRD door sills, ACT 6puck, MFactory LSD,Built trans, Euro tails and corners, Walbro 255, and more to come
                          Stage 3 Audi S4 pushing about 425awhp

                          Comment


                          • #14
                            Originally posted by Stanced4lyfe View Post
                            I've already had a stanced ef hatch. already did.
                            please leave the stance bs with the hondas and subarus and other cars... These cars are getting too few and far between to have them ragged out and tore up. also, stancing out a car defeats the purpose of even having power.. No reason in making it if you can't put it to the road.
                            1995 Probe GT. Colt 218* cams, Tein SS Coilovers with EDFC, K6F trailing arms, CZT traction bars, ZE Intake Manifold, Milly MAF/OBDII swap, GReddy SP1, Probe Addiction Strut braces, RX8 Seats, PRD STS, PRD door sills, ACT 6puck, MFactory LSD,Built trans, Euro tails and corners, Walbro 255, and more to come
                            Stage 3 Audi S4 pushing about 425awhp

                            Comment


                            • #15
                              Originally posted by Stanced4lyfe View Post
                              Naw I never did. I'm currently selling my jnc 016 wheels as I've bought the new ones. That is the plan to slam and be turbod lol don't worry I'll try my best not to disappoint.
                              wait so we wont get to see those wheels on the car? I've been waiting for this!
                              Beautiful Beast- 1997 PGT in process of becoming an SC/NA Beast...
                              Elo- 1990 BMW 325i weekend car
                              Brunhilde- 2003 BMW Z4 3.0 6-speed daily driver
                              The Beast- Sleeping in the junkyard...

                              Comment

                              Working...
                              X