Hi guys,
I decided to make another thread after my stalling problem.
I am still unable to find the problem.
My probe starts normal, and runs/idles fine. If after 10 min I shut the engine of and start again it suddenly doesn’t want to start or takes a while before it does start. When it finally starts and I give some gas and let go of the gas-pedal, the rpm’s go all over the place. When it calms down it drops to 0 rpm and looks like the engine is off and then suddenly it comes back to 500 rpm and it keeps doing this a while.
I also had this happening when stopping for traffic lights, and car didn’t want to start at all.
I had to be towed 2 times now. After some time, I could start again and drive.
I replaced the Crank position sensor and ECT sensor but problem still persists.
Also, the ECU doesn’t show any codes.
I am (still) at a loss…
Any idea’s?
I decided to make another thread after my stalling problem.
I am still unable to find the problem.
My probe starts normal, and runs/idles fine. If after 10 min I shut the engine of and start again it suddenly doesn’t want to start or takes a while before it does start. When it finally starts and I give some gas and let go of the gas-pedal, the rpm’s go all over the place. When it calms down it drops to 0 rpm and looks like the engine is off and then suddenly it comes back to 500 rpm and it keeps doing this a while.
I also had this happening when stopping for traffic lights, and car didn’t want to start at all.
I had to be towed 2 times now. After some time, I could start again and drive.
I replaced the Crank position sensor and ECT sensor but problem still persists.
Also, the ECU doesn’t show any codes.
I am (still) at a loss…
Any idea’s?
Comment