If you want in on the final buy for the modded fuel rails, this will be the thread to post up in.
These are stock KL fuel rails machined to accept Nissan style injectors. There are some pics shown below. I installed this Nissan redtop for the pics. I used a new Nissan upper O-ring, and a stock KL lower O-ring. Also, you MUST lubricate the o-rings with petroleum jelly (vasalene) during the install, or you will dammage the o-rings. If you have these lubricated properly they will install by pressing them in, by hand only, no tools required. I do strongly suggest you clean them also, in case there are any chips or materials that are still present after the machining process.
These are the highest quality modded rails you can purchase!
How to mod Nissan Injectors
These are machined and ready to ship NOW!
I am changing jobs in the next couple weeks, and I will loose the ability to mod these, this will be the final buy for these.
They will run you $85 shipped to the lower 48 states, and $95 shipped to Canada. If your from anywhere else, PM me.
I also have two modded rails that are for the inlet side only..only one fuel rail...so they are not a set, I will sell these for $20 shipped. If you buy one, you can take your other side to a machine shop and have it bored to match, you will have one to go on this way.
My Paypal addy is:
mbolin@gte.net
Let the ordering begin!
Who's getting them:
1. Z28ForLife
2. whomikejoness
3. cf_z
4. maac0953
5. Joe_Kamman
6. 2point5
7.
8.
9.
These are stock KL fuel rails machined to accept Nissan style injectors. There are some pics shown below. I installed this Nissan redtop for the pics. I used a new Nissan upper O-ring, and a stock KL lower O-ring. Also, you MUST lubricate the o-rings with petroleum jelly (vasalene) during the install, or you will dammage the o-rings. If you have these lubricated properly they will install by pressing them in, by hand only, no tools required. I do strongly suggest you clean them also, in case there are any chips or materials that are still present after the machining process.
These are the highest quality modded rails you can purchase!
How to mod Nissan Injectors
These are machined and ready to ship NOW!
I am changing jobs in the next couple weeks, and I will loose the ability to mod these, this will be the final buy for these.
They will run you $85 shipped to the lower 48 states, and $95 shipped to Canada. If your from anywhere else, PM me.
I also have two modded rails that are for the inlet side only..only one fuel rail...so they are not a set, I will sell these for $20 shipped. If you buy one, you can take your other side to a machine shop and have it bored to match, you will have one to go on this way.
My Paypal addy is:
mbolin@gte.net
Let the ordering begin!
Who's getting them:
1. Z28ForLife
2. whomikejoness
3. cf_z
4. maac0953
5. Joe_Kamman
6. 2point5
7.
8.
9.
Comment