Announcement

Collapse
No announcement yet.

AZPOC Members

Collapse
This is a sticky topic.
X
X
Collapse
 
  • Page of 3
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • #1

    AZPOC Members

    The People of
    AZPOC



    I would like to setup a thread for AZPOC Members to post their information, since we do not have an official AZPOC website. This will also help identify everyone, to people we have not met and to new members as well. (May cut down on the "I spotted a Probe is it anyone here?" posts? )

    You can return anytime and edit your post with new information. You can get creative and link a picture of yourself to your name, and so on.

    PLEASE use the format below. PLEASE make only one post and PLEASE no comments in this thread.

    If you have any questions you can PM me.




    ------------------------\/\/\/\/ ---- Plese Use Format Below ---- \/\/\/\/-------------------

    Name
    Location

    Year, Make, Model

    PIC 1 (link)
    PIC 2 (link)

    Mods List: Mod 1, Mod 2, Mod 3, etc...

    ***(If more than 1 car, repeat starting from Year, Make, Model)***

    ------------------------/\/\/\/\ ----/\/\/\/\/\/\/\/\ ---- /\/\/\/\-------------------



    .
    Last edited by SBPGT; September 15, 2009, 06:37 PM.
    Currently buying all my parts for my future part-out thread...https://forums.probetalk.com/core/im.../icon_look.gif
    STEVE B
    1993 Probe GT
    2016 Mustang
    Tags: None
    • Stuck
  • #2
    Jared

    North-west Tucson

    95', Rio Red, Ford Probe

    Few Years Old Pic Car has got stock 5-stars on at the moment, and soon to be multi-colored as I replace my front bumper, fender, and side-skirt, then prep for paint.

    -Cold Air Intake
    -Ported & knife edged intake manifold
    -Headers
    -Testpipe w/ flanged cutout
    -2.5" Exhaust
    -F&R Poly motor-mount inserts
    -L&R filled motor-mounts
    -Tranny brace
    -14lb lightened MX-3 Flywheel
    -Spec Stage 3, 6 puck clutch
    -SS Clutch Line
    -Tokico Blue Struts
    -Eibach Springs
    -F&R Strut tower braces
    -Minor Weight Reduction


    Mods ready to be installed:
    -AWR 19mm rear sway-bar
    -NOS 5115 Dry Kit, w/ Purge & Bottle Heater
    -Megasquirt
    -Serious weight Reduction
    Last edited by Jicks; September 15, 2009, 01:41 AM.
    93 PGT
    95 PGT - 15.4 - 2.3 60' - I/H/E cutout, 14lb flywheel, SPEC stg 3, tokico struts, eibach springs, tranny brace, minor weight reduction.
    There = location, Their = possessive, and They're = They are.
    Your = possessive, You're = You are
    I'm sure we all passed 4th grade grammar, lets act like it.

    Comment

    • #3
      Steve Brannigan
      Tempe

      93 Ford Probe GT

      Pic 1
      Pic 2
      Pic 3
      Pic 4
      Pic 5
      Pic 6
      Engine Pic
      Interior Pic
      Action Shot
      Action Shot
      Action Shot

      172HP/153TQ Dyno Plot (Red is the VRIS Tied Open)

      Engine:
      KL-ZE Intake Manifold
      KL-DE Port Matched Heads
      Outlaw Eng. Thermal Spacers
      HotShot Cold Air Intake
      SSAC Headers
      Magnaflow Hi-Flo Cat and Resonated Test Pipe
      Magnaflow 2.5” Cat Back Exhaust
      Poly Motor Mounts
      MSD 6A Ignition
      MSD Blaster SS Coil
      '00 ECU/MAF Conversion
      Magnecor KV85 Coil/Plug Wires
      PRD Fan Shroud

      Transmission:
      Short Throw Shifter
      Mbolin5 Trans Brace
      Sach's Performance 6-puck Clutch

      Suspension:
      K-Sport Kontrol Pro Coil-Over
      RRE Front Strut Bar
      RRE Rear Strut Bar
      626 Rear Sway Bar
      Hawk HPS Brake Pads
      RX7 FD Wheels
      Dunlop Direzza Sport Z1 Star Spec 225/50/16

      Exterior:
      Probe GT 95+ Rear Bumper
      Custom Clear Corner Lights
      Shaved Door Locks, Antenna, and Emblems

      Interior:
      Probe GT 95-97 Black Dash, Doors, and Panels
      Tan Leather Seats
      G-Tech Pro EGS Tach

      Uninstalled Parts:
      Turbo hot pipes
      GT3076R
      Synchronic BOV
      Synchronic WG
      Water/Air IC
      Megasquirt MS3X
      Last edited by SBPGT; November 24, 2014, 08:49 PM.
      Currently buying all my parts for my future part-out thread...https://forums.probetalk.com/core/im.../icon_look.gif
      STEVE B
      1993 Probe GT
      2016 Mustang

      Comment

      • #4
        Elliott Crane
        Tucson/TUPOC

        2001 C5 Z51 Corvette and 1982 Mazda RX7 V8 Turbo Swap


        Probes to Date: 10 Or more who knows now (Plus 1 MX6 M-Edition) (I have now owned 2 SE's.... weird)

        ----Modifications----

        Corvette
        Engine:
        Milled 243 Heads (10.8:1 Compression)
        Comp Xtreme RPM XR275HR 222/224 .566/.568 @112LSA
        Lunati Dual Spring Kit .660 Max
        Crane Gold 1.7 Roller Rockers
        7.250 Hardened Push Rods
        42lbs SVO Green Top Injectors Running E85
        BBK SSI Intake Manifold
        BBK 90mm Throttle Body
        BBK Intake Bellow and Cross Over
        ASP 25% Underdrive Harmonic Balancer
        Double Roller Timing Chain
        LS3 Oil Pump
        160 Degree Thermostat
        MSD Plug Wires
        Texas Speed 1" 3/4's Long Tubes
        Full Dual Exhaust w/X-Pipe to Corsa Cat Back
        B&M Ripper Shifter
        Flex-a-lite Slim Line Fans

        RX7
        Engine:
        Ford 302 .030 Over Forged Bottom End (Now a 306)
        Victor Intake w/ Custom Intake Elbow for the Turbo Setup
        42lbs SVO Green Top Injectors
        Water/Meth Injection
        Custom Turbo Kit built from Shorty Headers
        3" Exhaust and Down Pipe no Cat
        Aluminum Radiator w/ Variable Speed Fan from a Viper



        Corvette
        Suspension:
        Tick Adjustable Master Cylinder
        Lightweight Flywheel
        Spec Stage 3 Clutch Kit
        C6-Z51 Struts
        C6-Z51 31mm Front Sway Bar
        C6-Z51 25.4mm Rear Sway Bar
        C6 Trans Tunnel Brace Upgrade
        Moog Metal Endlinks
        Slotted Rotors

        RX7
        Suspension:
        8.8 Rear End
        15" Rims


        Corvette
        Appearance:
        Matte Silver Gauge Bezel Trim Rings
        Black Housing Turn Signals
        Punisher Oil Cap
        OE Rims C6 Deep Dish Polished Gunmetal Rims
        Mesh Z06 Front Bumper Grills
        Custom Corvette Shifter w/ 6 Speed Pattern
        Black Powder Coated Rear Exhaust plate w/Flaming Jake Skull

        RX7
        Appearance:
        Custom Gauges
        Custom Interior
        Custom Hood
        Custom Paint lol


        Corvette
        Electrical:
        OEM Heads Up Display
        AEM Wideband
        Sony In Dash DVD Unit

        RX7
        Electrical:
        Wideband and other goodies


        Corvette Dyno Results -- Check back Friday
        RX7 Dyno Results -- @ 16PSI on a 91 & Race Gas mix 515WHP 599WTRQ (Mustang Dyno)
        Last edited by Cross; July 9, 2012, 02:47 PM. Reason: Updating
        Denny Crane /\ Capsule E.R.
        05 GTO 408 Stroker \ 13 FRS LSx Swap (IP) / 02 Camaro SS 6.0L Chey's \ 14 F-150 5.0L / 96 MX6 M-Edition
        Give college students enough time and they can set anything on fire. --Cross & White Dart

        Comment

        • #5
          Matt
          Eastside of tucson

          2001 ws6 (I've owned 13/14 probes/mx6's)

          Ls6 bottom end, fast fuel rails,A1000 fuel regulator, two 255 fuel pumps,master power T76 turbo. Corvette zr1 rims with 315 drag radials out back.

          Bmr k-member,upper and lower A-arms,qa1 12 way adjustable struts (fronts are coilovers),lowering springs out back,sphon torque arm,bmr lower control arms and relocation brackets,adjustable panhard bar.

          Turbo system designed and built by myself. Other then that its mostly stock. Lol

          Future plans are a cage,9" rear end, 400+ cube engine,th 400 and a transbrake.
          Last edited by harvey93gt; September 15, 2009, 03:38 PM.
          03 frontier family car/dd
          93 mx6 tessa's car: ze and just about every bolt on.
          01 ws6 : 618/695 wrecked tell your kids to use a effing cross walk!!
          02 35th SS.. heads and cam

          Comment

          • #6
            Mike Chavez
            North Glendale

            1995 PGT-t

            No good pics yet.

            Mod list:
            TEIN-SS coilovers with EDFC
            solid mounts (from 3 diff. vendors)
            front and rear strut bars,CZT floor bar
            PRD S2000 rotor upgrade w/braided lines
            2.5" mandrel Borla catback
            Mr.Speed 6 puc clutch
            Custom 1 off intake w/67mm TB
            Colt turbo cams
            DE bottom/ZE heads
            MBX fpr w/255lph & 280cc's
            MSD 6a w/ gutted distributor
            TW hot pipes
            ebay I/C pipes with a Greddy type S
            ebay t3/t04e .63/.60 57trim
            LC-1 wideband w/ oldscool analog guage
            MS full stand alone
            13.5lb Dynabatt (sitting under headlight)
            Phat Griffin radiator
            AVC InterCooler
            VW Touareg oil cooler 24"x4"x3/4" with sandwich adaptor
            FD wheels
            Twin eye headlights

            On the waiting list sitting in a box:
            H-Beam rods
            SS clutch line


            Wish list:
            water injection
            coil packs
            Last edited by mac1; September 29, 2010, 02:53 AM.
            1993 Mercury tRacer :Vitara & mFactory: In progress 2020
            1994 Mercury TrAcer Wagon : '02 SPI swap : sold
            2014 Factory Five 818s: sold
            2000 Lotus esprit v8TT : 1st v8 on MS3x, ls1 coils,h20 injection
            1997 Nissan 200sx 1.6L : 35-39mpg the daily

            Comment

            • #7
              Tony

              1993
              Ford Probe GT

              http://i145.photobucket.com/albums/r...t/DSC05393.jpg

              http://i145.photobucket.com/albums/r...t/DSC06007.jpg

              Mod list..

              engine/powertrain:

              hennesy axle back exhaust
              port matched intake mani
              95 motor
              atx/mtx swap
              coned tb
              High flow CAT.

              Interior:

              Short throw shifter
              95 dash
              black and grey semi custom 95 interior
              alpine headunit
              alpine sub amp (hidden placement)
              pioneer door and quarter speakers
              2 jbl 10's
              Custom jon93pgt rear seat delete

              body and suspension:

              Carbon Fiber hood
              Rota Wheels 17X8
              Ksport complete coilovers
              Silverstone X Drilled Rotor w/ Gold Cadmium Plating Finished
              addco 27mm swaybar
              Jon93pgt hyme joint rear endlinks
              new front control arms
              95 red outlined taillights
              Clear Corners



              1991
              Kawasaki ZX-7

              http://i145.photobucket.com/albums/r...0ff19a4df5.jpg
              http://i145.photobucket.com/albums/r...5pgt/tony5.jpg

              Mods
              Fully Polished Frame/Swingarm
              Polished Lips on wheels
              Racetech Front Forks
              Full Muzzy Exhaust
              Stage II Jet Kit
              Green EK Chain
              46 tooth rear sprocket
              15 front sprocket
              Bad Phish Frame sliders
              Last edited by tnovello; September 15, 2009, 12:08 PM.
              Original Ricepoc member
              93 Black GT,mildly modified..----------------- SOLD
              1991 Kawasaki ZX7R....all the speed i need!!!

              Comment

              • #8
                John aka Goss (last name lol)
                Home Base:Gilbert; but also spotted in PHoenix, Suprise, tempe, and mesa

                1993 Probe GT *SOLD*

                PIC 1 http://viewmorepics.myspace.com/inde...mageID=4920753 (before knowing how to drive a lowered car)
                PIC 2 http://i90.photobucket.com/albums/k2...e/SNC00002.jpg and after and current

                MODS:
                20lbs bookshelf
                headers
                exhaust
                Coilovers
                Solid motor mounts
                Capsule Racing Intake manifold
                CAI
                wideband
                Act 6-puck
                MX3 Flywheel
                17" rims
                STS


                1987 Mustang LX

                MODS:
                MSD ignition wires and coil (needs the box)
                Flow Master broken exhaust
                Autozone CAI
                70mm TB


                1994 Mazda MX6

                Currently blown head gasket, updates to come.
                Last edited by Felonofdope; April 30, 2010, 08:14 PM.
                07 Mazda3 bone stock daily
                87 Foxbody 5.0 - 217whp/272tq 12.4:1afr!
                94 MX-6: SOLD!
                93 PGT- ZE, headers, exhaust, CAI, Capsule Racing intake manifold (VRIS delete), Mx3 fw, Act 6-puck, AEM af guage (SOLD)

                Comment

                • #9
                  Matt Hicks
                  NW Tucson
                  Everything else is in the sig.
                  Matt Hicks
                  Silver 97 2.0 Turbo
                  Factory Green ZX6RR
                  If you have 1,000 posts and have not donated to PT, you should consider doing so.
                  "We're all still learning."

                  Comment

                  • #10
                    Chris Beittenmiller

                    East Tucson

                    2000 Civic (owned a 99 626 and a 97 Probe GTS)

                    Mods: Eibach springs, KYB struts, SPC camber kit, 17" Drag DR-11, drilled rotors, titanium rear lower control arms, front and rear tie bars, front and rear strut bars, Mugen lip kit, Gear Speed transmission (equipped with a Quaife LSD), Clutchmaster Stage 3 clutch (soon to be a Spec Stage 3), 7lb Fidanza flywheel, solid mounts, and now to the head... machined and port matched head equipped with 1mm oversized sodium filled valves, Crower Stage 2 cam, 330 injectors, AEM fuel rail, AEM AFPR, Skunk2 intake manifold, oversized TB, Skunk2 CAI, DC Sport ceramic coated 4-2-1 header, 2.5" crush bent exhaust out a magnaflow muffler, all soon to be running through a Hondata S200 ECU.
                    Chris Beittenmiller (just call me Bitey)

                    Member: MOPOC, AZPOC, ChrisPOC, BrokenPOC, RedPOC, TuPOC, etcPOC
                    1997 Rio Red GTS -- Tranny blew up... dead... RIP
                    Current cars: 2000 Civic EX... 2004 Chrysler Pacifica...

                    Comment

                    • #11
                      Name: Tessa Kozar (Colegrove) too lazy to go change the last name
                      Location: Tucson

                      Year, Make, Model:
                      93 Mazda MX6

                      havnt been on here in forever but i think the link to my car is in m y sig
                      :edit: ok it IS in my sig had to post before i knew

                      Mods List: uh.............
                      a slow motor that runs 16.9
                      a tranny that dont slip
                      an exhaust that smokes
                      an intake
                      and stereo stuff.
                      oh oh!! and a body kit with my favorite...... PURPLE PAINT!!

                      i have no clue what i have... ask my husband... he knows..
                      i had a kid, i forgot.
                      Last edited by PurpSpdRcr95; September 28, 2009, 10:15 AM.

                      Comment

                      • #12
                        New Guy, introducing himself...



                        James A Randolph
                        Marana/Avra Valley

                        93 Mazda MX6

                        Will post pics when I get a chance...

                        Mods List: Currently no mods as of yet... working on getting the car to fire first... then here I come...

                        Comment

                        • #13
                          Name: Karl Wehrle

                          Location: Mesa

                          I have a 93 Mazda MX-6 LS

                          (I will post pics later of my awesome faded hunter green paint)

                          Mods:
                          5 spd conversion
                          TurboXS headers
                          Test pipe
                          Borla cat back exhaust
                          Ebay intake
                          16mm sway bar
                          FD 13.5lb wheels (225/50r16) tires
                          Ksport lowering springs
                          Cosmo racing short shifter
                          Bronze oil shifter bushings
                          Poly inserts for motor mounts

                          Interior:
                          Kenwood head unit
                          Pioneer door and rear shelf speakers
                          600watt jvc amp
                          10inch MTX sub

                          Comment

                          • #14
                            New Guy....

                            Name: Charles Colvin

                            Location: Tucson

                            1995 probe gt No current pictures

                            Current Mods: 2.5" exhaust magnaflow muffler... that's it

                            Comment

                            • #15
                              Mike

                              Phoenix Metro

                              1995 Ford Probe GT

                              1st Pic:http://i296.photobucket.com/albums/m...yllp/right.jpg

                              No mods. It's only been 3 days.

                              Comment

                              Previous 1 2 3 template Next
                              Working...
                              X