Announcement

Collapse
No announcement yet.

Peak and hold injector driver box

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Peak and hold injector driver box



    Need to run really big injectors? Like 225 to 550 lb/hr? Or have a set of old low-z injectors that you just don't want to swap out? We now offer an 8 channel peak and hold driver board for these low impedance injectors to make using them with an MS3-Pro or other MegaSquirt product a snap! The box itself is the proven Acceleronics Versaufeler; we tested it and were impressed with how it seemed to be nearly bulletproof and never ran hot. But we have added a unique twist to the ones we sell: They ship with our own harness color coded especially to match the MS3-Pro and MS3X injector wire color coding for easy installation with our engine management, with extra long wires to reduce the number of splices needed.

    8 channel peak and hold driver board from DIYAutoTune
    Matt at DIYAutoTune.com
    My PM box fills up fast - it's much better to email me at websales@diyautotune.com
Working...
X