Steering Rack Bushing replacements

[J_Unit]

Hmmmm....... Maybe that's the issue.
Are control arms expensive or hard to replace?

"http://www.ebay.com/itm/New-Control-Arm-Set-1993-1997-Ford-Probe-626-MX-6-Car-Part-Front-Lower-Pair/350909279344?_trksid=p2047675.c100005.m1851&_trkpa rms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3 D40130%26meid%3D149b71610843416084968c3f98f87124%2 6pid%3D100005%26rk%3D1%26rkt%3D6%26sd%3D3109168196 46"

After shopping around for mine, ebay had the best deal. This is a set for under $60

If i were to do it all over, i would of got this complete set that has everything you will need for worn out front suspension basically. I bought all the stuff separate all within a few months of each other, so i spent more in the long run.

"http://www.ebay.com/itm/Stabilizer-Bar-Link-Control-Arms-Tie-Rods-Strut-Mount-Fits-Ford-Probe-1993-1997-/272591364175?fits=Model%3AProbe%7CSubmodel%3AGT&ha sh=item3f77b6204f:g:JDgAAOSw44BYSWk7&vxp=mtr"

$120 You get inner and outer tie rods, strut mounts, sway bar links, control arm/ball joint assemblies with new bushings already installed.

[reuben_johnston]

If you're going for performance, I recommend the K6F tubular control arms ($430), which have polyurethane bushings. For a little extra, you can also get tabs to attach traction control bars. http://king6fab.com/?product=tubular...l-arm-full-kit
REub

[ScottF]

Sorry to resurrect this thread, but I have seen some polyurethane bushings on eBay for around 30-40 bucks. But they do have a listing for Mx-6/Probe/626. Going to get a set when I get my tax return.