Advertise with ProbeTalk - click here to find out how!



Advertise with ProbeTalk - click here to find out how!
Advertise with ProbeTalk - click here to find out how!

ProbeTalk.com Forums

Go Back   ProbeTalk.com Forums > Vendor Support and Contact > Former Vendors > Darkstar Motorsports

Darkstar Motorsports Offering Light weight Pulley Kits & Solid Motor Mounts

 
 
Thread Tools
Old January 2nd, 2009, 11:45 AM   #1
dmark101
Obfuscatory & Abstruse Nomenclature
 
dmark101's Avatar
 
Join Date: Jan 2000
Location: Location: Location:
Posts: 34,506
Welcome Darkstar Motorsports to PT!

welcome aboard. they offer lightweight pulley sets and solid motor mounts for the probe/mx-6/626 and other mazda and ford vehicles.
__________________
33rd ANNUAL FABULOUS FORDS FOREVER - APRIL 15, 2018
Every Probe owner in CA is encouraged to attend! - Plan for it NOW!
dmark101 is offline  
Old January 2nd, 2009, 12:32 PM   #2
jasons96pgtze
Colt Cams BB Master
 
Join Date: Mar 2008
Location: Kansas
Posts: 3,005
Cool hopefully they will have lots to offer the probe and mx6 community.. Im always looking for bigger and better things for my pgt
jasons96pgtze is offline  
Old January 2nd, 2009, 12:50 PM   #3
c-man
Mega Moderator
 
c-man's Avatar
 
Join Date: Feb 2000
Location: SOCAL
Posts: 22,061
Welcome to the site.
__________________
2015 Audi Q3 - Stock |
2017 Audi TTS - 034, Magnaflow |
c-man is offline  
Old January 2nd, 2009, 05:32 PM   #4
LowClassCC
Fazda Tuning
 
LowClassCC's Avatar
 
Join Date: Apr 2007
Location: Mauckport, Indiana
Age: 42
Posts: 2,074
welcome to probetalk guys.

Quote:
Originally Posted by dmark101 View Post
welcome aboard. they offer lightweight pulley sets and solid motor mounts for the probe/mx-6/626 and other mazda and ford vehicles.
correction on the above statement (please dont throw me in the hole ) the mounts for the probe that they have are not solid mounts.

Quote:
This mount uses an 70A hot pour urethane
on another note the prices they have on them is less that a stock mount from my local parts stores by a decent amount.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by LowClassCC; January 2nd, 2009 at 05:35 PM.
LowClassCC is offline  
Old January 2nd, 2009, 05:42 PM   #5
blackpgt1994
North North American Mod
 
blackpgt1994's Avatar
 
Join Date: Jun 2003
Location: Toronto, Canada
Posts: 8,482
I hear we can expect to see a passenger side engine mount from you guys?
__________________
-Kyle
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

93 Black probe (K-sporting)
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


**

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
**
blackpgt1994 is offline  
Old January 2nd, 2009, 10:13 PM   #6
dmark101
Obfuscatory & Abstruse Nomenclature
 
dmark101's Avatar
 
Join Date: Jan 2000
Location: Location: Location:
Posts: 34,506
Quote:
Originally Posted by LowClassCC View Post
correction on the above statement (please dont throw me in the hole ) the mounts for the probe that they have are not solid mounts.
hey, i got that info direct from them.


__________________
33rd ANNUAL FABULOUS FORDS FOREVER - APRIL 15, 2018
Every Probe owner in CA is encouraged to attend! - Plan for it NOW!
dmark101 is offline  
Old January 2nd, 2009, 10:28 PM   #7
darkstarmotorsp
Guest
 
Join Date: Jan 2009
Location: San Deigo, CA
Posts: 184
Quote:
Originally Posted by blackpgt1994 View Post
I hear we can expect to see a passenger side engine mount from you guys?

yes!!! Medieval motorsports will be picking them up from the powder coater next week.




and Thank all you guys for welcoming us.
darkstarmotorsp is offline  
Old January 8th, 2009, 10:06 PM   #8
akmer
Turbo Member
 
Join Date: Feb 2005
Location: San Antonio, Texas
Age: 32
Posts: 1,810
sorry if it sounds dumb..but the mounts fit the v6 probe right? and any type of warranty with this mounts?
akmer is offline  
Old January 8th, 2009, 10:13 PM   #9
darkstarmotorsp
Guest
 
Join Date: Jan 2009
Location: San Deigo, CA
Posts: 184
Quote:
Originally Posted by akmer View Post
sorry if it sounds dumb..but the mounts fit the v6 probe right? and any type of warranty with this mounts?

4 cyclinder
darkstarmotorsp is offline  
Old January 8th, 2009, 10:35 PM   #10
akmer
Turbo Member
 
Join Date: Feb 2005
Location: San Antonio, Texas
Age: 32
Posts: 1,810
ohhh ok thanks..im looking for the v6 but thanks for your time
akmer is offline  
Old January 9th, 2009, 07:40 PM   #11
t_masters
Member
 
Join Date: Jan 2006
Location: Langley, BC
Posts: 260
The Mounts Seem almost exact to the V6....im not sure if they are the same or not but they look just like my Mounts on my GT

Wondering if the Pulley Kit for the 1.8 V6 would be the same pulleys used on the 2.5L V6
Same goes for the Crank Pulley?
__________________

2.25" stainless exhaust, Headers, CAI, AWR mounts, B&M Short Throw, Jacobs Pro-street, Front/Rear Strut brace, clear corners, Colt 210/210, Interprep valve springs, Aasco flywheel, CM IIR clutch, ZE IM, phenos
t_masters is offline  
Old January 9th, 2009, 07:57 PM   #12
MakatoMotors
PT Master
 
Join Date: Jan 2006
Location: LaX, WI
Age: 32
Posts: 5,094
any plans for the v6 from u guys?
__________________
2012 Ford Focus Hatch
Eibach Pro-Kit. AEM CAI, Magnaflow Exhaust. Steeda Rear Sway Bar. RS Spoiler. RS Hood. 18" MSW Wheels
16.28 @ 86.56
MakatoMotors is offline  
Old January 9th, 2009, 10:01 PM   #13
darkstarmotorsp
Guest
 
Join Date: Jan 2009
Location: San Deigo, CA
Posts: 184
Quote:
Originally Posted by t_masters View Post
The Mounts Seem almost exact to the V6....im not sure if they are the same or not but they look just like my Mounts on my GT

Wondering if the Pulley Kit for the 1.8 V6 would be the same pulleys used on the 2.5L V6
Same goes for the Crank Pulley?
after looking at you signature that you have AWR, then they might be the same. which mount s look the same to you? I haven't looked at a V6 probe moutns latley
darkstarmotorsp is offline  
Old January 9th, 2009, 10:54 PM   #14
unknowncitizen
Donating Member
 
unknowncitizen's Avatar
 
Join Date: Jan 2004
Location: SoCal
Age: 33
Posts: 3,919
On the rear motor mount designed for the 93-97 probe, what year was it designed to? the reason I ask is because if it was designed off a 93, you will have fitment issues on all 94+ probes because the change of the rear motor mount transmission bracket.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
~GREDDY~MAGNAFLOW~ACT
FIDANZA~WILWOOD~AWR~RR-RACING~HS~OUTLAW
PRD~MSD-WINDOWS~TEIN-SS~RX-8~ALPINE
unknowncitizen is offline  
Old January 10th, 2009, 11:01 AM   #15
t_masters
Member
 
Join Date: Jan 2006
Location: Langley, BC
Posts: 260
Quote:
Originally Posted by darkstarmotorsp View Post
after looking at you signature that you have AWR, then they might be the same. which mount s look the same to you? I haven't looked at a V6 probe moutns latley
Both front and rear mounts look the same as mine, but thats just from looking at the pictures.

Again - Will any of the pulleys work on the 2.5 V6?

Quote:
Originally Posted by unknowncitizen View Post
On the rear motor mount designed for the 93-97 probe, what year was it designed to? the reason I ask is because if it was designed off a 93, you will have fitment issues on all 94+ probes because the change of the rear motor mount transmission bracket.
When you order from AWR you do not need to specify year for the 2nd Gens....And i have a 94' And my mounts fit fine
__________________

2.25" stainless exhaust, Headers, CAI, AWR mounts, B&M Short Throw, Jacobs Pro-street, Front/Rear Strut brace, clear corners, Colt 210/210, Interprep valve springs, Aasco flywheel, CM IIR clutch, ZE IM, phenos

Last edited by t_masters; January 10th, 2009 at 11:02 AM. Reason: Automerged Doublepost
t_masters is offline  
Old January 10th, 2009, 12:30 PM   #16
darkstarmotorsp
Guest
 
Join Date: Jan 2009
Location: San Deigo, CA
Posts: 184
I don't think the pulley's would fit, but I'm concerned about the rear mount. Most likey it will fit the 94+ years.
darkstarmotorsp is offline  
Old January 12th, 2009, 12:33 AM   #17
darkstarmotorsp
Guest
 
Join Date: Jan 2009
Location: San Deigo, CA
Posts: 184
Quote:
Originally Posted by blackpgt1994 View Post
I hear we can expect to see a passenger side engine mount from you guys?

The site has been updated, they are on there now for sale
darkstarmotorsp is offline  
Old January 12th, 2009, 01:18 AM   #18
nstyPSE
Member
 
Join Date: Aug 2007
Location: WV
Posts: 359
So will the rear mount fit the 93s?
__________________
1993 Ford Probe - CAI, Side exit exhaust, Darkstar mounts, HEI.
nstyPSE is offline  
Old January 12th, 2009, 07:49 AM   #19
darkstarmotorsp
Guest
 
Join Date: Jan 2009
Location: San Deigo, CA
Posts: 184
Quote:
Originally Posted by nstyPSE View Post
So will the rear mount fit the 93s?
yes, it does
darkstarmotorsp is offline  
Old January 13th, 2009, 03:55 AM   #20
nstyPSE
Member
 
Join Date: Aug 2007
Location: WV
Posts: 359
Good, I need to order a set soon. I've always heard that the 93 rear mount was different and I never did figure out why.
__________________
1993 Ford Probe - CAI, Side exit exhaust, Darkstar mounts, HEI.
nstyPSE is offline  
 

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 08:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ProbeTalk.com is not affiliated in any way with the Ford Motor Company, the Mazda Motor Corporation, or any subsidiaries of either company.
All views and opinions expressed on this message board are those of the author and not the owners of ProbeTalk.com.