Announcement

Collapse
No announcement yet.

Acquired a FREE ZE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by Eric351M View Post
    The engine had the 32mm and the timing kit had the 16mm.
    I went to one junk yard a found nothing. I think it's going to be harder to find parts at the junk yard for probes.
    which yard did you go to?

    i still find a decent amount down at the wilmington yards. don't see too many up in ontario or san bernadino.
    ProbeTalk is BACK! Once again, it's what you use the Internet for!

    Let's get DANGEROUS!

    Comment


    • #32
      I went to Ontario and Riverside
      1994 Coral Mist Metallic PGT
      http://forums.probetalk.com/showthread.php?t=1701308460

      Comment


      • #33
        Originally posted by Eric351M View Post
        I went to Ontario and Riverside
        yeah, i had a feeling those were the two you went to.

        keep in mind that you can also grab the pulley from a 626 as well. if you find one, always keep both a 16mm and a 32mm pulley on hand. everywhere i looked, the larger bore water pump was actually less expensive that the smaller bore.

        go figure.
        ProbeTalk is BACK! Once again, it's what you use the Internet for!

        Let's get DANGEROUS!

        Comment

        Working...
        X