Announcement

Collapse
No announcement yet.

The big MegaSquirt guide for 2nd gen Probe GTs

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #91
    Originally posted by Titanium31 View Post
    *Bringing this thread back to life. I have a KLZE with a MS system hardwired in along with a probe OBD1 ECU. I'm wondering if it is possible to run the MS system through OBD1 (for the KLZE) AND through OBD2 as its swapped in a Protege. Any insight would be awesome!
    The MS is not OBD anything and does not care what OBD the car was originally wired for.
    Matt at DIYAutoTune.com
    My PM box fills up fast - it's much better to email me at websales@diyautotune.com

    Comment


    • #92
      Nice write up

      Comment


      • #93
        This write-up was very helpful. I wish I had it when I did my build.

        Comment


        • #94
          Does anyone have a wiring harness diagram for the MSnS3? I need to repair my harness because some wires have come loose and I can't find my original documentation. Right now the Probe is dead in the water.

          It's for a '95 PGT. The ECU pinout diags would also be appreciated. Thanks
          '95PGT-T / KFZE 2.0 V6, Fidanza FW, CM Stg 1, T4 Turbo @ 6psi Non IC, MSnS V3, RR Racing Mounts, Dropzone Springs, Gauge Pillar w/Autometer C2's

          Supermotors Profile
          Cardomain Profile

          Comment

          Working...
          X