Im trying to get jackies pgt up and running. A while ago i found a broken wire on the 3 pin connector of the disty. Fixed it and it ran. Now the same problem, no spark. Ive tried a new disty, with no luck.
BUT, her uncle (where the car is broke down at) got a new 3 pin connector at a junkyard and cut the wiring and spliced it into her wiring that goes to here disty. (if that makes sense)
Im thinking he has the wiring wrong...
Heres what i have coming from the ecu.... 3 wires
one large black wire w/ yellow stripe
green
yellow w/green stripe
If someone could tell me which one goes to what on the 3 pin connector, that would be great
-Ty
BUT, her uncle (where the car is broke down at) got a new 3 pin connector at a junkyard and cut the wiring and spliced it into her wiring that goes to here disty. (if that makes sense)
Im thinking he has the wiring wrong...
Heres what i have coming from the ecu.... 3 wires
one large black wire w/ yellow stripe
green
yellow w/green stripe
If someone could tell me which one goes to what on the 3 pin connector, that would be great
-Ty
Comment