PC's? I can build those too.

[j-dogg]

There is one other thing I can do to them, and that is modify them, anyone can screw in some cards and install parts that can't be installed backwards, not everyone can carve a perfect maltese into the side of a computer case freehand with a Dremel





edges sanded and rounded



P3 dualie test to make sure everything still works



some stuff for this weekend

Steel mesh

http://i64.photobucket.com/albums/h1...Picture008.jpg

Pre-formed sheets of plexiglas, sealed and drilled. Leftovers from a product long gone and perfect size of my case

http://i64.photobucket.com/albums/h1...Picture007.jpg

case handles?

http://i64.photobucket.com/albums/h1...Picture011.jpg

Expect updates weekly.

It will house a Phenom II x4 AM3 setup.

[BoostedMan]

Sweet Jesse

Hey you any multi intel processor's laying around, I have an IBM x-series e-server 220 Pentium III, I am working on, its minus one processor?
Also looking for the hot swap scsi's for it.

[j-dogg]

I've got some 1ghz. give me your stepping codes I've got two stepping codes and I might have a matched set

are they slot 1 or socket 370?

[CrimSon_ReD]

vERY nICE brah!!!!!!!

[BoostedMan]

I've got some 1ghz. give me your stepping codes I've got two stepping codes and I might have a matched set

are they slot 1 or socket 370?

I'll check it out later today and get back to you.

It's a socket, 1275ghz give or take

Jesse it's stepping tB1 1266mhz pentium III-S
Click here for server specs

[j-dogg]

I probably don't have any of those S cores but I'll check the boneyard I saw a few of them out there. If anything I can probably score you a pair of matched 1ghz cores, they should have the same L2 cache.

[TRWeiss1]

Looks good.

I can do that as well (and have in the past). I just like my new case too much to modify it, and it's already optimized for airflow.

The other skill commonly forgotten about with PCs is the ability to achieve a stable overclock...You're right, anyone can just screw sh*t together.

[Tweakx07]

this makes me miss my desktop

nice work tho. very cleanly done

[j-dogg]

1/3/10 Update

Started work on the blowhole. I am not exactly certain how this will turn out, so far so good, however one issue I am now realizing is the power supply and fan clearance with the blowhole. I think I can fit 3 fans on it if I push them forward and squeeze them together. The top 3 1/2" is going to house a small card reader so clearance toward the front is not an issue.

http://i64.photobucket.com/albums/h1...r/DSCF0197.jpg

http://i64.photobucket.com/albums/h1...r/DSCF0198.jpg



http://i64.photobucket.com/albums/h1...r/DSCF0200.jpg

cut off wheels before

http://i64.photobucket.com/albums/h1...r/DSCF0201.jpg

starting the cut

http://i64.photobucket.com/albums/h1...r/DSCF0202.jpg

http://i64.photobucket.com/albums/h1...r/DSCF0203.jpg

This Spoiler pops up when clock speeds exceed 4ghz



and done.



cut off wheels after.....RIP

http://i64.photobucket.com/albums/h1...r/DSCF0206.jpg

edges are nice and smoothed out, now time to do the case, brb in like an hour.

[TRWeiss1]

This Spoiler pops up when clock speeds exceed 4ghz

There just might be some people on this forum gullible enough to believe that.

[Lithium543]

I spy IDE drives.

[TRWeiss1]

I spy IDE drives.

This is true...FAIL!!!

SATA 3.0

I love that my board supports SATA 3.0, USB 3.0, 24GBs of DDR3, 3 PCI-E video cards, and many new CPUs to come.

[j-dogg]

FFFFFFUUUUUUUUUUUUU

I have IDE drives that are like 800mb lol

this is gonna have a Phenom II x4 in it when I'm done, whatever it takes to assrape everyone in the new Medal of Honor coming out for PC.

[TRWeiss1]

whatever it takes to assrape everyone in the new Medal of Honor coming out for PC.

****ing

That's coming out for PC? I'm so there!

Dammit, gotta wait til Fall!!!