Often times there are questions and issues that have been discussed at length for repairing and modifying the Probe. Some of us have taken the initiative to create a Frequently Asked Questions section that has a lot of useful information that will answer most of the more common questions.
Examples of questions that you might find within these FAQs are as follows:
Please select one or more of the links that may pertain to your quieries.
1G Probe/MX6 FAQ - lots of general information for 1Gs.
FE DOHC J-Spec engine swap information
3.0L Vulcan FAQ - Target Audience: 3.0L Vulcan V6 owners.
Basic Maintenance Recommendations - New to Probes or buy a used Probe? Here's the thread to get you started.
How-to: Converting DSM BOV into BPV
Wiring and Vacuum Line Diagrams
FAQ: Brakes!
How To: Pull Engine Codes
How To: Change slave cylinder
1G GT (F2T) Tuning by Probe This (300 HP)
Parts from other cars that work on the Probe
How to: Change faulty voltage regulator
How to: Repair/Change HLAs
DIY Port & Polish - Port & Polishing methods for the DIY'er.
Hopefully this will help all of us. Everyone has questions but sometimes the answer may be readily available and requires some researching.
IF your questions are not answered by one of these, please feel free to post asking for further clarification.
Thanks,
Anomaly
Examples of questions that you might find within these FAQs are as follows:
- How do I wire the MSD ignition system to my 1G Probe?
- What lowering springs are available?
- How do I access the front door and/or rear speakers?
- Can a non-turbo probe be converted into a turbocharged probe?
Please select one or more of the links that may pertain to your quieries.
1G Probe/MX6 FAQ - lots of general information for 1Gs.
FE DOHC J-Spec engine swap information
3.0L Vulcan FAQ - Target Audience: 3.0L Vulcan V6 owners.
Basic Maintenance Recommendations - New to Probes or buy a used Probe? Here's the thread to get you started.
How-to: Converting DSM BOV into BPV
Wiring and Vacuum Line Diagrams
FAQ: Brakes!
How To: Pull Engine Codes
How To: Change slave cylinder
1G GT (F2T) Tuning by Probe This (300 HP)
Parts from other cars that work on the Probe
How to: Change faulty voltage regulator
How to: Repair/Change HLAs
DIY Port & Polish - Port & Polishing methods for the DIY'er.
Hopefully this will help all of us. Everyone has questions but sometimes the answer may be readily available and requires some researching.
IF your questions are not answered by one of these, please feel free to post asking for further clarification.
Thanks,
Anomaly
Comment