Advertise with ProbeTalk - click here to find out how!



Advertise with ProbeTalk - click here to find out how!
Advertise with ProbeTalk - click here to find out how!

ProbeTalk.com Forums

Go Back   ProbeTalk.com Forums > Photography, Video, Photoshop > Probe Pic & Video Post

Probe Pic & Video Post Post your PROBE-RELATED pics and Videos here!

Reply
 
Thread Tools
Old October 22nd, 2005, 07:49 PM   #1
PGTRacer
Supercharged Member
 
Join Date: Jun 2000
Location: London, Ontario, Canada
Age: 36
Posts: 1,321
Haven't seen one this bad

Well I got around to taking apart the busted motor today. I can't imagine all this happened in just a split second

http://s91196822.onlinehome.us/finaly.wmv

This picture is just a top of the piston everything below the first ring land is gone


This one I still can figure out... the wrist pin some how was pushed out of the rod and shot through the top of the piston. And on cyl #6 the piston was completly shredded in bits of aluminum, the cylinder walls were also cracked.


This is what I found when I took off the oilpan...


whats left of the lower part of the block



How the heck did that get in jamed in there?


That one piston still looks pretty good





__________________
'93 Probe GT - [email protected]
'05 Mustang GT - [email protected]

Last edited by PGTRacer; December 8th, 2005 at 08:38 PM.
PGTRacer is offline   Reply With Quote
Old October 22nd, 2005, 07:52 PM   #2
shaodome
Megasquirt OG
 
shaodome's Avatar
 
Join Date: Apr 2002
Location: Hollywood, FL
Age: 33
Posts: 9,201
Nice carnage....time for that nice shiney built motor to go in.
__________________
I believe in moderation and that includes moderation.
92 Lexus SC300 - 780whp/700tq 36+ psi
shaodome is offline   Reply With Quote
Old October 22nd, 2005, 07:55 PM   #3
Stevoh
Senior Member
 
Join Date: Mar 2003
Location: Sunnyvale, CA
Age: 31
Posts: 2,682
GODDAMN! Well, that motor served you quite well I'd say. Having run your best time yet so far with it right? RIP little stock block.
__________________
Chameleon Blue 95 PGT 5 Speed
Primered 89 PGT 5 Speed
Black 97 BMW 540i 6 Speed
Stevoh is offline   Reply With Quote
Old October 22nd, 2005, 07:58 PM   #4
akmer
Turbo Member
 
Join Date: Feb 2005
Location: San Antonio, Texas
Age: 31
Posts: 1,810
damn lol
akmer is offline   Reply With Quote
Old October 22nd, 2005, 08:00 PM   #5
Masamune
Donating Member
 
Masamune's Avatar
 
Join Date: Jan 2002
Location: Inman, South Carolina
Age: 30
Posts: 513
Good god!

That is crazy.. I don't know what to say... that's pretty damn awesome... but also sorry about the motor..

So & .. Good luck though.. building a new one??
__________________
2004 Dodge Dakota 4.7, 1986 Yamaha FZX700, 2006 Scion TC, 1991 Civic Hatch
Masamune is online now   Reply With Quote
Old October 22nd, 2005, 08:09 PM   #6
KM_heisler
Donating Member
 
KM_heisler's Avatar
 
Join Date: Apr 2004
Location: BramptonPOC, CANADA!!!11!!!1!!1!!!
Age: 30
Posts: 3,210
.. that is how you blow an engine with style!
__________________
Kevin Heisler

90 JDM Fairlady Z , twin turbo lots of stuff done already but not enough space in the sig

Last edited by KM_heisler; October 22nd, 2005 at 08:12 PM.
KM_heisler is offline   Reply With Quote
Old October 22nd, 2005, 08:22 PM   #7
P1P
Turbo Member
 
Join Date: Nov 2002
Location: Somewhere in ATL in bed with your momma
Posts: 1,669
P1P is online now   Reply With Quote
Old October 22nd, 2005, 08:27 PM   #8
ouch1011
Donating Member
 
ouch1011's Avatar
 
Join Date: Jul 2001
Location: ProbesNW.com
Posts: 17,298
Wow, almost looks like the engine hydrolocked, but I know it didn't!! Must have been a bit of pressure in the cylinder

Thats interesting what happened to the wrist pin...
__________________
Kevin B - Former Probe-owner

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


ouch1011 is offline   Reply With Quote
Old October 22nd, 2005, 08:28 PM   #9
andysblowngt
Guest
 
Join Date: Oct 2004
Location: in da /x\ipoc fixing my car
Posts: 3,934
pic 3 and 4 are awsome might be the best yet
andysblowngt is offline   Reply With Quote
Old October 22nd, 2005, 08:28 PM   #10
blackpgt1994
North North American Mod
 
blackpgt1994's Avatar
 
Join Date: Jun 2003
Location: Toronto, Canada
Posts: 8,481
infricking-creadable!
__________________
-Kyle
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

93 Black probe (K-sporting)
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


**

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
**
blackpgt1994 is offline   Reply With Quote
Old October 22nd, 2005, 08:51 PM   #11
KINGMARTY03
Turbo Member
 
Join Date: Mar 2002
Location: Corona / Irvine, Cali
Age: 33
Posts: 1,872
How much boost did it take to finally blow it?
__________________
06 Evo IX, SSL - 417 HP / 418 TQ Stock Turbo
92 Galant VR-4 -#802/1000 Evo3 16g, Robispec KW V3 / 94 Miata M-Edition - Stock
89 MX6 GT 4WS SOLD 89 PGT R.I.P
93 PGT /93 PGT-SOLD/89 PGT-R.I.P. /96 PGT R.I.P.
KINGMARTY03 is offline   Reply With Quote
Old October 22nd, 2005, 09:05 PM   #12
deyan
PT Master
 
Join Date: Aug 2003
Location: Royal Oak, MI
Age: 31
Posts: 5,476
Quote:
Originally Posted by KINGMARTY03
How much boost did it take to finally blow it?
25+ psi
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

96 Probe GT (Sold)
93 KLZE Base Probe (Sold)
deyan is offline   Reply With Quote
Old October 22nd, 2005, 10:09 PM   #13
Dan [Sac]
Admiral General
 
Dan [Sac]'s Avatar
 
Join Date: Feb 2000
Location: Nor*Cal
Posts: 25,065
That's what happens when you run NOS! And 3 of the big ones at that! bad Victor!







Nice work
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
- KLZE, fender-flared, right hand drive, 2350 lb fully loaded sex machine. ||
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
||- SOLD
93 PGT
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
- 10.24 @ 139.9 mph ||545 whp @ 20 psi ||
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
||
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
||
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
- GONE
97 GTS - Rear Wheel Drive KLZE, 6-speed, 3.90 Torsen LSD, 2650 lb, daily driver! -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
- GONE
90 Ghettocet KLiata - forever WIP
Dan [Sac] is offline   Reply With Quote
Old October 22nd, 2005, 10:09 PM   #14
ZoomZoomZoom
Senior Member
 
Join Date: Dec 2001
Location: London, ON
Age: 33
Posts: 2,994
dear god Vic, u ****ed that motor right up


__________________
Vlad - 1994 Silver MX-6 - ZE + a mod or two
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

1995 White Probe SE - Daily Driver/Winter Beater
1989 White Probe GL-T - Got Boost? - SOLD (RIP)
1989 White Probe GT - SOLD (RIP)
ZoomZoomZoom is offline   Reply With Quote
Old October 22nd, 2005, 10:38 PM   #15
ouch1011
Donating Member
 
ouch1011's Avatar
 
Join Date: Jul 2001
Location: ProbesNW.com
Posts: 17,298
you may have answered this, but how many F/I drag runs did that engine make?
__________________
Kevin B - Former Probe-owner

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


ouch1011 is offline   Reply With Quote
Old October 22nd, 2005, 10:56 PM   #16
OneTrkMnd
PT Regular
 
Join Date: May 2004
Location: louisville ky
Age: 36
Posts: 435
34 i believe
__________________
bodied 87 ranger 302/t5
bagged 79 courier shop truck
bodied 75 luv 427w/t5
93 pgt parked since 8/05
OneTrkMnd is offline   Reply With Quote
Old October 22nd, 2005, 11:01 PM   #17
stanghater
Recovering....
 
stanghater's Avatar
 
Join Date: Feb 2004
Location: Albuquerque, NM
Age: 37
Posts: 2,596
holy crap dude
__________________
Josh - NMPOC | CAMTuning
02 Lexus IS300 | work in progress (2JZ-GTE coming soon)
05 Subaru Legacy GT Wagon | lots of mods | 261whp 268wtq
stanghater is offline   Reply With Quote
Old October 22nd, 2005, 11:07 PM   #18
jon93PGT
Five Star Member
 
jon93PGT's Avatar
 
Join Date: Dec 2000
Location: Jupiter, FL
Age: 36
Posts: 11,155
very nicely done Victor.... the wrist pin through the piston is pretty impressive... I'd put my built motor down on a bet that you couldn't do that again if you tried..

__________________
2014 BMW 328d Luxury Line- Mineral White/Saddle Brown Leather, Premium Package, Driver Assistance Package, Cold Weather Package, Navigation, car seats inside

2012 BMW X3 35i M Sport- Traded

2003 BMW 330i ZHP- Alpine White/Natural Brown Montana Leather, Performance Package, Cold Weather Package, Navigation, Certified Dinan Stage III, car seats inside

2004 BMW 330i ZHP- Totaled
jon93PGT is offline   Reply With Quote
Old October 23rd, 2005, 12:05 AM   #19
Vixander
Balls Across The Nose
 
Vixander's Avatar
 
Join Date: May 2003
Location: Douchebagville
Age: 30
Posts: 2,025
Now THAT is how you blow up an engine
Vixander is offline   Reply With Quote
Old October 23rd, 2005, 12:29 AM   #20
j-dogg
/p/hotoPOC
 
j-dogg's Avatar
 
Join Date: Sep 2004
Location: pwning the crap out of supersquid in Unreal Tournament
Age: 31
Posts: 14,699
It'll buff out.
__________________
PhôtôPOC(tm)
MM9 MMX FF FF2 FF3 FF4 FF5
95' base 289k of DD sex on factory-sealed motor and climbing, Eibach pro kit, chrome swirls, 626 swaybar, front and rear STB's, Frankenprobe's Brembro rotors, quad lazy-eyes, ice-cold AC
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2014 Kenworth T680 505hp 1800ft.lb.
j-dogg is offline   Reply With Quote
Old October 23rd, 2005, 04:04 AM   #21
SPLXTREM
POC Mod
 
SPLXTREM's Avatar
 
Join Date: Apr 2001
Location: At the local SPL competition woopin yo a$$
Age: 37
Posts: 1,420
OMFG!! That has got to be the worst engine failure I have ever seen . to 35 runs on 20+ psi with n2o.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
President, Founding member of Team Legion Of Boom

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
SPLXTREM is offline   Reply With Quote
Old October 23rd, 2005, 04:50 AM   #22
PGTRacer
Supercharged Member
 
Join Date: Jun 2000
Location: London, Ontario, Canada
Age: 36
Posts: 1,321
just to clarify a few things, that motor has about 50 runs on it at the drag strip, and 34 dyno pulls. And there was no NOS used to do this... just boost
__________________
'93 Probe GT - [email protected]
'05 Mustang GT - [email protected]
PGTRacer is offline   Reply With Quote
Old October 23rd, 2005, 05:35 AM   #23
Da-ze
Balls Across The Nose
 
Join Date: Oct 2002
Location: PA
Age: 33
Posts: 2,198
I got some time and a basket full of JBWELD!


but seriously I am surprised that the crank to a beating like that! not only that, these photos show what the real weakness of these motors are..

the pistons and wristpins.... these photos prove alot of info...
Da-ze is offline   Reply With Quote
Old October 23rd, 2005, 10:32 AM   #24
pin
Five Star Member
 
pin's Avatar
 
Join Date: Feb 2000
Location: Langdon, ND
Age: 35
Posts: 10,028
Yeeehaww!! Nice work!
__________________
Barry
01 Saturn SL2 5-speed

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
pin is offline   Reply With Quote
Old October 23rd, 2005, 11:01 AM   #25
andysblowngt
Guest
 
Join Date: Oct 2004
Location: in da /x\ipoc fixing my car
Posts: 3,934
Quote:
Originally Posted by Da-ze
I got some time and a basket full of JBWELD!


but seriously I am surprised that the crank to a beating like that! not only that, these photos show what the real weakness of these motors are..

the pistons and wristpins.... these photos prove alot of info...


acctually the rods are the weak point in these motors, the crankshaft should take a hell of a lot of power since its forged from the factory and i beleve no one to this day has snaped one inhalf or put a crack threw it
andysblowngt is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ProbeTalk.com is not affiliated in any way with the Ford Motor Company, the Mazda Motor Corporation, or any subsidiaries of either company.
All views and opinions expressed on this message board are those of the author and not the owners of ProbeTalk.com.