2.5 DE Vacuum diagram pic

TravisWilliams_GT · November 23rd, 2009, 12:39 PM

Dead links abound in the maintenance thread. And I memorized it along time ago. If you have it somewhere, host it or eMail me so I can host it here permanently.

I have the Millenia S one:

but we need the KL-DE one in OBD I AND OBD II

polarexpress17 · November 23rd, 2009, 12:47 PM

First one is a 96-97

Second one is 93-95

Both KLDE (KL03)

TravisWilliams_GT · November 23rd, 2009, 01:04 PM

attaching the image scaled it down, can you email it to me: wopath at juno com

lilpavel · November 23rd, 2009, 01:55 PM

Thanks Travis, I felt as though I would have been slammed for asking. So I have been searching all day long running into dead links and links probably blocked by my work servers.

Dutchy · November 23rd, 2009, 01:57 PM

Travis, unless you can prove to me that your old computer crashed and your house (in which I imagine picture frames with vacuum diagrams and torque specs in every room) burned down, you let me down.

polarexpress17 · November 23rd, 2009, 02:03 PM

Those are the same size that are saved in my pictures. i don't have any bigger ones

Xplode · November 23rd, 2009, 05:58 PM

www.bcpoc.ca/techinfo

i've got the diagrams hosted there. at least a couple of them. if there's more out there, i'd like to get them too.

EDIT: took a second look at the thread here... my color one is scaled down too...

(M-edition) · November 23rd, 2009, 08:19 PM

for future reference. ppl can always google it on the images part...

Gt-Addict · December 9th, 2009, 01:39 PM

I have a question, A while ago, I happened to ran across a couple pictures from google, in regards to where hoses and stuff went.....it was labeled with numbers and stuff, to kind of help you figured out where stuff went, and etc, but cant locate the site where I got the pictures from, I am posting one, just 2 see if anyone here remembers seeing the pictures...thanks.....then maybe someone can help me figure out the site, or post the link.... thanks....

TravisWilliams_GT · December 9th, 2009, 08:11 PM

-
IAC coolant line
IAC coolant line
-
-
-
Throttle cable
Brake Master Cylinder vacuum hose
VRIS #2 harness connector
VRIS #1 harness connector
Evap Canister Purge Control solenoid
HVAC vacuum supply hose
PCV rear valve cover supply

***c-man*** · December 9th, 2009, 09:36 PM

since the [img] tags work here....this thread is stuck!

UnorthodoxCreat · February 21st, 2010, 07:58 PM

Where is the circled port on a '96? Is it really under the manifold?

Gt-Addict · February 22nd, 2010, 01:51 AM

Quote:

Originally Posted by UnorthodoxCreat

Where is the circled port on a '96? Is it really under the manifold?
http://images.geekazoids.net/mani.jpg

No its kind of like where #6 runner its, except on the #5 it should be visible, just by following the diagram....

lilpavel · February 22nd, 2010, 01:49 PM

Adam if you don't see it just off the #5 runner, you have an OBDI IM on the car.

dukes193 · February 22nd, 2010, 02:27 PM

yeah you cant miss it look down right next to the TB and #6 runner and you should see it. if you want i can grab a pic of mine really quick

UnorthodoxCreat · February 22nd, 2010, 03:28 PM

Thanks guys, I found it. Not only was I looking in the spot but it still had a hose on it so I wasn't seeing the nipple.

Gt-Addict · February 23rd, 2010, 02:03 AM

Quote:

Originally Posted by UnorthodoxCreat

Thanks guys, I found it. Not only was I looking in the spot but it still had a hose on it so I wasn't seeing the nipple.

Just so that is stays here for other people to see.... here is a closer pic of the 5 and 6 runners....

#5 Runner in Red
#6 Runner in Blue

NudeFury · April 4th, 2010, 02:18 PM

Thanks, very helpful.

Joe

Mr6speed · May 2nd, 2010, 06:14 PM

i like that

Addicted95 · September 30th, 2010, 08:46 PM

nice very helpfull

fordprobegt67 · April 30th, 2011, 10:18 PM

here is some real pics let me know if they are helpful or if i should take down

Ripbabey · May 20th, 2011, 06:07 PM

Does anyone know what changes when in the vacuum diagram if u have an obdII car (97pgt) and swapped in a obdI motor (94 626 LS)

ZE runner · May 20th, 2011, 10:22 PM

1st off you dont have to change anything if youre using the 97 ecu & IM. but fyi its like what they were just talking about. the obd II has an extra nipple on runner 5 for the egr boost sensor. That seems to be it.

If youre going to use a obdI IM just get a vac T or you might could drill and create your own nipple

no no not that kind of nipple lol

Ripbabey · May 21st, 2011, 09:43 AM

I have the IM that came with the engine. So i do believe its obd1 unless previous owner changes the IM which i highly doubt but it looks exactly like the one that was on my 97.

Thanks tho that helps alot! Im gonna see about creating " that kind of nipple"

MattJ89LX · June 6th, 2011, 05:49 AM

Question, on the 93-95, where does the vacuum hose go that attaches to thr nipple just above the hoses that are attached to the solenoid valves? I knocked out changing my trans and for the life of me can't find where it goes

November 23rd, 2009, 01:04 PM	#3
TravisWilliams_GT yes.....wait, what? Join Date: Feb 2000 Location: Lynchburg, VA Age: 41 Posts: 12,533	attaching the image scaled it down, can you email it to me: wopath at juno com __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ----- Sold within NEPO and PT To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ----- STUPID FAST To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ----- Damn I miss her.

November 23rd, 2009, 01:55 PM	#4
lilpavel SENSLES Join Date: Jul 2000 Location: NEPO MD Age: 38 Posts: 2,785	Thanks Travis, I felt as though I would have been slammed for asking. So I have been searching all day long running into dead links and links probably blocked by my work servers. __________________ ///M-POC To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. 448whp at 24psi Built by Me, Tuned by SHAODOME Flyrtle 6 - Best 2nd Gen Probe MMX - PRD BEST of Show and 1st Place Unlimited Class MM8 - PRD BEST of Show

November 23rd, 2009, 05:58 PM	#7
Xplode Donating Member Join Date: Mar 2005 Location: Langley, BC Age: 35 Posts: 5,017	www.bcpoc.ca/techinfo i've got the diagrams hosted there. at least a couple of them. if there's more out there, i'd like to get them too. EDIT: took a second look at the thread here... my color one is scaled down too... __________________ BC Probe Owners Club is VERY MUCH ALIVE - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.* - Stock DE, ZE Intake Manifold, T3/T4 .50/.63 AR Turbo, Valant Turbo Pipes, Tial 38mm Wastegate (~9PSI), Custom Water/Meth Injection, Megasquirt v3 (MSnS-Extra 029q2 Fuel/Spark), Millennia Injectors @ 70psi, 65mm TB, JJ Resonated TP, Centerforce DF Clutch, MX3 Flywheel, AWR Mounts, it begins all over again... *To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.* To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. GARAGE - The hybrid with a piston hole... lots of various leftovers... Last edited by Xplode; November 23rd, 2009 at 06:01 PM.

November 23rd, 2009, 08:19 PM	#8
(M-edition) Supercharged Member Join Date: Nov 2006 Location: Oklahoma Posts: 1,190	for future reference. ppl can always google it on the images part... __________________ 1997 Mazda Mx-6 2.5

December 9th, 2009, 08:11 PM	#10
TravisWilliams_GT yes.....wait, what? Join Date: Feb 2000 Location: Lynchburg, VA Age: 41 Posts: 12,533	- IAC coolant line IAC coolant line - - - Throttle cable Brake Master Cylinder vacuum hose VRIS #2 harness connector VRIS #1 harness connector Evap Canister Purge Control solenoid HVAC vacuum supply hose PCV rear valve cover supply __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ----- Sold within NEPO and PT To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ----- STUPID FAST To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ----- Damn I miss her.

November 23rd, 2009, 12:39 PM	#1
TravisWilliams_GT yes.....wait, what? Join Date: Feb 2000 Location: Lynchburg, VA Age: 41 Posts: 12,533	2.5 DE Vacuum diagram pic Dead links abound in the maintenance thread. And I memorized it along time ago. If you have it somewhere, host it or eMail me so I can host it here permanently. I have the Millenia S one: *but we need the KL-DE one in OBD I AND OBD II* __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ----- Sold within NEPO and PT To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ----- STUPID FAST To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ----- Damn I miss her. Last edited by TravisWilliams_GT; November 23rd, 2009 at 12:40 PM.

November 23rd, 2009, 01:57 PM	#5
Dutchy Donating Member Join Date: Jan 2007 Location: The Netherlands Age: 32 Posts: 3,216	Travis, unless you can prove to me that your old computer crashed and your house (in which I imagine picture frames with vacuum diagrams and torque specs in every room) burned down, you let me down. __________________ 1994 Probe 16v 1995 Probe 24v 1994 Mustang GT 5.0 1993 Probe 24v 1996 Mustang SVT Cobra 1993 Probe GT 2003 SVT Cobra Terminator

November 23rd, 2009, 02:03 PM	#6
polarexpress17 bibliographically epic Join Date: Oct 2005 Location: Hazleton, PA Age: 27 Posts: 9,221	Those are the same size that are saved in my pictures. i don't have any bigger ones __________________ 95 mx6 with a 4 lug swap Built, Not Bought. No, my username is Not from that stupid movie.

December 9th, 2009, 01:39 PM	#9
Gt-Addict BATN, but aka: magnaflowsystem Myfast93 kl93419 96kl killzsrt's Join Date: Aug 2009 Location: Ohio Age: 36 Posts: 4,152	I have a question, A while ago, I happened to ran across a couple pictures from google, in regards to where hoses and stuff went.....it was labeled with numbers and stuff, to kind of help you figured out where stuff went, and etc, but cant locate the site where I got the pictures from, I am posting one, just 2 see if anyone here remembers seeing the pictures...thanks.....then maybe someone can help me figure out the site, or post the link.... thanks....

December 9th, 2009, 09:36 PM	#11
*c-man* Mega Moderator Join Date: Feb 2000 Location: SOCAL Posts: 22,061	since the [img] tags work here....this thread is stuck! __________________ 2015 Audi Q3 - Stock \| 2017 Audi TTS - 034, Magnaflow \| Last edited by c-man; February 22nd, 2010 at 02:04 PM.

February 21st, 2010, 07:58 PM	#12
UnorthodoxCreat Not done yet... Join Date: Nov 2003 Location: Hanover, PA Age: 33 Posts: 5,373	Where is the circled port on a '96? Is it really under the manifold? __________________ Adam Kirkpatrick 1994 Ford Probe GT-T - Built for me, by me, 265whp 2010 Ford Fusion SEL - Wife's daily driver . . . . . . . . . . . . . 1997 Ford Explorer XLT 4x4 - Daily driver 1997 Ford F-150 XLT 4x2 - Work truck, wrapped, on 20's . . . 2001 Ford Focus SE Wagon - Work car Last edited by UnorthodoxCreat; February 21st, 2010 at 08:19 PM. Reason: spelling

February 22nd, 2010, 01:49 PM	#14
lilpavel SENSLES Join Date: Jul 2000 Location: NEPO MD Age: 38 Posts: 2,785	Adam if you don't see it just off the #5 runner, you have an OBDI IM on the car. __________________ ///M-POC To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. 448whp at 24psi Built by Me, Tuned by SHAODOME Flyrtle 6 - Best 2nd Gen Probe MMX - PRD BEST of Show and 1st Place Unlimited Class MM8 - PRD BEST of Show Last edited by lilpavel; April 4th, 2010 at 08:14 PM.

February 22nd, 2010, 02:27 PM	#15
dukes193 Donating User Join Date: Feb 2007 Location: Leesburg, VA Age: 33 Posts: 4,604	yeah you cant miss it look down right next to the TB and #6 runner and you should see it. if you want i can grab a pic of mine really quick __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. in its prime To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Stripped and gutted rebuild from ground up. 2000 Explorer XLS 2 inch lift 32 inch BFG's My Wifes Daily

February 22nd, 2010, 03:28 PM	#16
UnorthodoxCreat Not done yet... Join Date: Nov 2003 Location: Hanover, PA Age: 33 Posts: 5,373	Thanks guys, I found it. Not only was I looking in the spot but it still had a hose on it so I wasn't seeing the nipple. __________________ Adam Kirkpatrick 1994 Ford Probe GT-T - Built for me, by me, 265whp 2010 Ford Fusion SEL - Wife's daily driver . . . . . . . . . . . . . 1997 Ford Explorer XLT 4x4 - Daily driver 1997 Ford F-150 XLT 4x2 - Work truck, wrapped, on 20's . . . 2001 Ford Focus SE Wagon - Work car

April 4th, 2010, 02:18 PM	#18
NudeFury Guest Join Date: Apr 2010 Posts: 2	Thanks, very helpful. Joe

May 2nd, 2010, 06:14 PM	#19
Mr6speed Newbie Join Date: May 2010 Location: Toledo, Ohio Posts: 7	i like that

September 30th, 2010, 08:46 PM	#20
Addicted95 Member Join Date: Feb 2008 Location: howell Posts: 383	nice very helpfull

April 30th, 2011, 10:18 PM	#21
fordprobegt67 Supercharged Member Join Date: Apr 2011 Location: Manchester, IN Age: 32 Posts: 1,172	here is some real pics let me know if they are helpful or if i should take down

May 20th, 2011, 06:07 PM	#22
Ripbabey Jr. Member Join Date: Dec 2002 Location: Yorkville, il Age: 33 Posts: 116	Does anyone know what changes when in the vacuum diagram if u have an obdII car (97pgt) and swapped in a obdI motor (94 626 LS)

May 20th, 2011, 10:22 PM	#23
ZE runner Supercharged Member Join Date: Aug 2010 Location: Rockhill, SC Age: 35 Posts: 1,005	1st off you dont have to change anything if youre using the 97 ecu & IM. but fyi its like what they were just talking about. the obd II has an extra nipple on runner 5 for the egr boost sensor. That seems to be it. If youre going to use a obdI IM just get a vac T or you might could drill and create your own nipple no no not that kind of nipple lol __________________ Current DD- 04 Neon Srt4 02 SuperHawk To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. 97 PGT-ZE-T- Parted and sold 97 PGT- Sold, 07 Mazda6 Grand Touring- Sold

May 21st, 2011, 09:43 AM	#24
Ripbabey Jr. Member Join Date: Dec 2002 Location: Yorkville, il Age: 33 Posts: 116	I have the IM that came with the engine. So i do believe its obd1 unless previous owner changes the IM which i highly doubt but it looks exactly like the one that was on my 97. Thanks tho that helps alot! Im gonna see about creating " that kind of nipple"

June 6th, 2011, 05:49 AM	#25
MattJ89LX Donating Member Join Date: Feb 2006 Location: Oakville, Ontario Age: 34 Posts: 175	Question, on the 93-95, where does the vacuum hose go that attaches to thr nipple just above the hoses that are attached to the solenoid valves? I knocked out changing my trans and for the life of me can't find where it goes __________________ 1995 white GT, Eibach lowering springs on Tokico Illuminas, Borla catback, NGK Irridium Plugs, NGK wires, Bomz CAI, Ebay STS Clarion ProAudio DX855MP deck, Clarion ProAudio APA450 amplifier, Rockford Fosgate P3001 amplifier, 2 Rockford Fosgate P210S4 subwoofers, Quantum Audio Q52 mids, Audison St2 500 rsc's