Tweet
Is there anything that commonly breaks with the seat bolster? It works but as soon as you release the button the air begins to leak out and it releases. Any problems anyone has dealt with that i should keep in mind? thanks.
-
-
I know the lumbar breaks all the time when the metal peices comes off their mounts. Maybe the bolster has some similar pieces inside the seat if you open it up?96 PGT & 97 Prizobe put down in their prime, 96 PGT with minor bolt-ons :SOLD & MISSED:
95 PGT-ZE with more bolt-ons :SOLD for rwd fun:
71 Mach1 Mustang w/a 400 its Aliiiiiiiive!
02 allroad 2.7TT w/ 60k #because bags, Porsche brakes, Stg I Tune & Exhaust...just getting started -
You've most probably got a leak in the bolsters themselves or the tubes that attach to the back of the switch.'93 PGT black on black and loaded: Southbend Stage 2 TZ series clutch, MX3 flywheel, STS, CAI, headers, Magnaflow exhaust,Kenwood KDC-X792 deck, Infinity speakers, 2 Infinity Kappa Perfect 12.0 subs, MTX 2300 Thunder and Sony amps...
Like Probes, 'Stangs, Guitars or Pugs? Check out my photobucket!
http://s486.photobucket.com/albums/r...ugsrule_photo/Comment
-
Thanks guys,ill check it out one of these days that its not so damn cold out.Comment
-
Mine does this too. Thanks for the information. I will start by checking the switches, before opening the seat up.Comment
-
I can hear mine leaking by the switch. Didn't know that might be fixable. I will look into mine too. Thanks to all.Probe out for Harambe
94 PGT KLZE http://i882.photobucket.com/albums/a...psr6dk8q1m.jpg
https://www.youtube.com/watch?v=aauXMeITcdMComment
-
Pugsrule had it right. I took the side panel off the seat today and unless i held the lines to the switch it would leak out. I just went ahead and wrapped a cable tie around the lines and part of the switch and its all good now. Thanks!Comment
Comment