Announcement

Collapse

Corner Store Forums Rules - PLEASE READ this and the stickies!

UPDATED: Changes have been made, effective 1 Nov 2010, and are in RED

The general WTB forum has been REINSTATED and REOPENED!


Rules for the Corner Store forums:
  • No E-bay links - if you want to sell something here, sell it. This is not an auction house.
  • No feeler threads - again, if you want to sell something, sell it.
  • No soliciting sales through the PM system. If you are caught doing this, you will be dealt with accordingly.
  • If you are selling something, include either a fixed price or the lowest acceptable price.
  • Please use a descriptive thread title. If you post in the For Sale forum, please add a FS: tag to whatever it is you're selling.
  • Please add state tags in all thread titles in the CS, No one is excluded from this.
  • Post in the CORRECT forum. Miscellaneous items belong in that forum. The For Sale forum is strictly for Probe/MX-6/MX-3/626 related items.
  • If you have multiple items for sale, list them in ONE thread!
  • Only Authorized PT Vendors may post new threads in the Vendor For Sale forum. This is to facilitate easily finding the Vendors sale threads.
  • Any parts sellers must now include a picture of the parts they are selling, along with something showing their screen name and ProbeTalk.com alongside the item they're selling
  • Anyone who takes an unreasonable amount of time to deliver goods or pay for those goods will be UNCONDITIONALLY BANNED PERMANENTLY.
  • The ONLY way to reverse this is to make good on your commitment and then both seller and buyer contact me to lift the ban.
  • Anyone banned and reinstated for failing to deliver/pay for goods will not be allowed back into the Corner Store.
  • "Reasonable time" means not more than 15 days after a deal has been reached, unless the parties involved have made prior arrangements.
  • The minimum number of posts required to view the Corner Store is 15.
  • Lastly, no *bump* posts. This is frowned upon and we look at it in the same light as 'free post'. DO NOT DO IT!

These rules were not meant to be all-inclusive, however with the amount of time spent trying to work them out, these are the best set of rules that we felt should be documented and made readily available for the members and to provide a point of reference for the staff in case they are approached with any questions.

The rules for the Corner Store are always up for review and revision as necessary.

To clarify a few things regarding advertising: when the board was first created, we did not seek sponsorships of any kind. As the board grew, it became necessary to seek out and secure sponsors for the site in order to help growth of the site and to maintain/upgrade the server on which it sat. Any additional funds were used to acquire site items that were made available for sale and to help provide funding for meets the site would help sponsor or sponsor entirely.

We have done our best to remain outside of the vendor/customer relationship. We have never tried to push any sort of vendor or product to our membership, as it has often been alluded to in the past, we have taken this stance so that we would not be perceived as 'playing favorites. We think it has worked well and our members have been able to speak their minds freely, however as with most sites, there have been some members who have taken this to the extreme and felt that they were entitled to do so.

As a result, this means that we will continue to implement a policy on non-sponsor advertisements and general spam. We will not hinder discussion of competing websites or their products as long as it is relevant to the discussion at hand, however general spamming or promotion of competing sites or of non-sponsored vendors or products cannot be allowed. To allow this would do a disservice to the vendors/sponsors who have given their time and resources to help make this site available to everyone.

An example of a relevant discussion would be regarding throttle bodies, intake manifolds, or suspension items. Yes, it would be okay to mention who manufactured the item and what the benefits of the product would be vs. another manufacturer's product. It would NOT be okay to mention where to purchase them if they are NOT an Authorized PT Vendor or site sponsor.

Another example would be using the private messaging system to circumvent the advertising rules. A last example are signature links. Only Authorized PT Vendors are allowed to have links to their website or to any other Vendor site. There are NO exceptions. Any violator may or may not be warned if they are in violation.

A final example would be lurking through the For Sale forum for potential customers if you are someone who is operating a salvage business. By salvage business, we mean that you are a person or agent of a company who deals in the salvage parts trade. This could mean someone who frequents the local salvage yards, picks up whatever parts are available, then comes onto the board looking to sell them. This is a means of using a free service to promote your business and that is considered unauthorized advertising.

We ask for your understanding in our need to take these steps for the betterment of our community. These changes should not affect most of the membership, except in a good way. If you've had a good experience with a sponsor, by all means, let others know; if your experience wasn't so good, we ask that you let others know of this as well. This is what the feedback system is for and we encourage everyone to use it.

Our operating procedures will always be independent of any vendor or product and we will always listen to suggestions that any member might have.
See more
See less

(TX)1990 pgt modded with HX35 turbo

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • (TX)1990 pgt modded with HX35 turbo

    Hate to do this, But, I need to let it go to fund another project. I have a history with this car and absolutely fell in love with it once I bought it. The car is currently NOT RUNNING. The engine that is currently in the car is a GL engine that most likely cracked a piston, which I have found to be kinda common. I have the original engine which has just been bored .040 over, honed,vated. Also included are stock rods with new Kieth Black hyper pistons, complete master gasket set from rock auto. The spare engine has not been reassembled. The crank ended up not being able to be reused, so you can either remove the crank from the engine in the car or purchase a new one. As for the turbo set up goes there is an hx35 turbo that had been profesionally rebuilt and balanced, i have put roughly 5k miles on this turbo and it has been a fun 5k miles, 2.5" turbo pipes and Ebay intercooler, Tial 40mm wastegate,1G crushed BOV.

    For fuel delivery, it has a 190 walbro pump, ebay fpr, stock injectors,stock ignition. Also installed is a probinator chip, white face gauges,intrax springs,cross drilled rotors,goodridge stainless brakelines, old school probe short throw shifter, Fidanza 11LB flywheel, SPEC 6 puck clutch.

    I have quite a few spare parts that go to the car,some NOS OEM parts,But mostly used spare parts removed from other cars. The interior is in pretty good condition, one crack on the dash on the pasenger side. The trip computer works great and still has the door intact.

    Now for the financial side, I know the price may be high but obviously I want to get the most possible and leave room for bargaining. I would like to get $1100 for everything which includes car,spare engine,and all spare parts.

    For $900 you can get the car and spare engine, or for $500 you will get the car alone. I do have the title in my name,all sales are final and as-is. I want this car to go to a fellow probe enthusiast and not someone that will just mistreat it. You can contact me though PM or phone, I prefer text as its more convenient since I am working most of the time. 702 494 7598-alan.








    with a nicer set of wheels
    Last edited by hybrid; October 3, 2011, 09:59 PM.
    http://www.cardomain.com/ride/301046...henville-tx-us
    1990 pgt,HX35 turbo, bigger fmic,tial wastegate,p&p head,spec 6 puck clutch,fidanza flywheel,dsm blow off valve,intrax springs,now all i need is MS and injectors!!

  • #2
    I don't think you're asking too much, i think its a fair price! GLWS
    93 silver PGT-T----> Turbo parted. Car sold as of 5/4/12

    2009 Mazdaspeed3 GT--> Metro grey metallic, SRI, short shift plate.

    Comment


    • #3
      bump.
      http://www.cardomain.com/ride/301046...henville-tx-us
      1990 pgt,HX35 turbo, bigger fmic,tial wastegate,p&p head,spec 6 puck clutch,fidanza flywheel,dsm blow off valve,intrax springs,now all i need is MS and injectors!!

      Comment


      • #4
        where in tx?
        92 PGTt3/t4, hks pipes, large fmic, 460cc inj, chipped, tucked
        89 MX6 GT planned KL swap + nitrous + turbo
        93' PGT Junked
        93' PGT Sold... then riced out.

        Comment

        Working...
        X