BULK BUY: Modded KL Fuel rails for NISSAN injectors

[Kov]

Payment sent

Thanks again for holding a set for me I didnt know how fast they were going to go!

Also have the core set ready to send!

[Joe Kamman]

Though I have a set of modified SR20 rails that I've been using for years, I might be interested in a modded KL set. I had to make some clamps to install the SR20 rails that have worked well, but it's not quite as solid as modded rails. Anyway, have a few questions.

-What are you supplying to hold the injectors in the rails.
-Where does the spray end of the injector line up relative to the rail (i.e. does it stick out of the bottom of the rail, or flush with the bottom, or ?)

[Mbolin5]

Though I have a set of modified SR20 rails that I've been using for years, I might be interested in a modded KL set. I had to make some clamps to install the SR20 rails that have worked well, but it's not quite as solid as modded rails. Anyway, have a few questions.

-What are you supplying to hold the injectors in the rails.
-Where does the spray end of the injector line up relative to the rail (i.e. does it stick out of the bottom of the rail, or flush with the bottom, or ?)

I think I linked it in the feeler thread about installing the nissan injectors...but I may have forgot to do that...lol, i will check that out in a few. But, you use the nissan injector hats. You have to oblong the holes a little bit because the center distance is different, but its quick work with a dremmel.

I will get some pics for you of the injector exit, but its very close to stock location.

Payment sent

Thanks again for holding a set for me I didnt know how fast they were going to go!

Also have the core set ready to send!

Thanks! I will post up a list tomorrow of where we are at on the BB.

how long before the custome harnesses will be done?

I am trying to get one finished to show pics of yet this week. I have supplies on hand to build four harnesses.

[Kov]

as said before +1 for the harness

[GENESIS II]

I'll take a harness as well. Keep us/me posted of when their done. I can pay when ever you finish the 1st four!

[Kov]

I claim one of the first 4 also dibs dibs dibs

[FrankMcgee]

I need 1 also please (wire harness)

will pay as soon as you like.

[KES16]

Payment has been sent

[Mbolin5]

Payment has been sent

Got it...


4 sets of rails are now sold!

[Eclipse]

can i still get one?

[GENESIS II]

Thanks for another great deal. The rails look good! Don't forget, I had dibbs on one of those first of four wiring harnesses too, please leave feedback for the fuel rails and the tractions bars.

Thanks again...

[Mr.Jason]

I never did get confirmation of shipment. or an answer to my PM about returning cores.

[fncrazgt_82]

i bought these last year and am installing them i just have a couple questions....
1. wat is the flow rate of these injectors?
2. how much for the plug n play harness?
thanks,
kevin

[Mbolin5]

I never did get confirmation of shipment. or an answer to my PM about returning cores.

Yes, all rails are in shipment, some have received them already.

I will shoot you a PM about the return core addy.

i bought these last year and am installing them i just have a couple questions....
1. wat is the flow rate of these injectors?
2. how much for the plug n play harness?
thanks,
kevin

Who did you purchase the rails from? I have no record of your screen name purchasing a set.

Sorry, I dont sell injectors alone, so I cant give you a flow rate. There are Nissan injectors out there that will flow from 280 cc/min to 980 cc/min. You can get just about any flow rate you want! The rails are capable to flow 980 cc/min though.

The harnesses arent ready yet, the nissan injector connectors are way more pricey than the use to be, but I have one set almost soldered up and ready to show off,so you can all see what they look like.

[Eclipse]

is that a no?