Colt Cams Bulk Buy

[norweja96]

I just got off the phone with Geoff at Colt Cams, i was just interested in finding out how much it would be to regrind my cams.
He told me to my suprise and delight that there is a bulk buy starting December 1st. He is emailing me the price sheet as we speak, but the more that get on board the cheaper it gets. This is because the setup time for our cams is quite tedious.

If you were thinking about it, or like me have been for a while, now is the time (at least for me)

I will post the prices when i get them. But basically if you can have your cams shipped to them before december 1st, you will be saving a bucketload of $$$

[jasons96pgtze]

I was going to start a feeler for this but have just been tied up with this megasquirt coil on plug thing im wanting to do. Why dont we start a feeler thread and see if we can get enough interest. Christmas is just right around the corner and a lot of people might have to hold out on buying goodies until after the holidays. I will try to start a feeler thread when I get back from taking my daughter trick or treating later this evening

[yellowrob]

Yea I am interested but only if it gives us a couple of months to get our shit together

[KLZEEscortGT]

I'd be interested in a set. and as yellowrob said as long as we have some time. Will it be for any specific grind??

[ZeroR]

I am in for sure. I already have the cams out. I was going to do this anyways during the winter season, but with the bulk buy, it's just great timing.

Need more details please! Do we just send the cams in on our own whenever we are ready?

[jasons96pgtze]

Well I haven't talked to Geoff about this yet because I figured a feeler would be a good idea first but I will call him Monday and start a feeler tonight when i get home. Usually we would need at least ten people for a bb though. Did Geoff mention anything like that when u talked to him?

[norweja96]

OK, so all you have to do is call Geoff and tell him you are interested, send him the cams, they MUST arrive by December 1st.

Here are the prices:

NA/Turbo: $390.00
Race, SC/NOS: $410
Tri-Flow: $475

These prices include return shipping to the US/Canada

---------- Post added at 10:26 PM ---------- Previous post was at 10:24 PM ----------

The BB is already on, so these are the prices, but i think if we get a few more people in, he might be willing to make it a little cheaper.

If you have further questions email Geoff1@coltcams.com or give them a call.

[DIY_Si]

The bulk buy prices currently listed on the Colt Cams website are cheaper than the ones you've posted. Is this a different deal, or is the website just out of date?

[KaedenKy]

I'd be interested, has this been cleared with Stacy? It appears to be in the wrong section of the website.

If you wanted to get more people on it cross post on mx3, mx6, and mazda 24/7.

[norweja96]

Where on the coltcams website do you see a BB section for our cars? I got these numbers from Geoff on Friday, so my guess is that they are the right ones, and what they have on the website is old.

[jasons96pgtze]

I'd be interested, has this been cleared with Stacy? It appears to be in the wrong section of the website.

If you wanted to get more people on it cross post on mx3, mx6, and mazda 24/7.

I cleared the bb feeler with stacey a few weeks ago. She stated to me that I have permission to run the feeler for the bb anytime. I am going to try to make time today to give geoff over at colt a call and get everything figured out.

[SuperK]

There are about 4 sets coming from us MX-3 guys. I'll be sending a request soon to geoff and be sending off two sets

[KLZEEscortGT]

I cleared the bb feeler with stacey a few weeks ago. She stated to me that I have permission to run the feeler for the bb anytime. I am going to try to make time today to give geoff over at colt a call and get everything figured out.

Any luck with Geoff today??

[jasons96pgtze]

I called and left a message. I guess he was busy today lol. I also sent him an email. Im sure I will know something soon. He has always got back to me quickly

[KLZE Porsche]

When you hear from him -I am down for a set of SC cams. I have had my set of blanks stored and waiting now for two years. Let's bring it!