So I finally got the Meqasquirt working ... just obviously not tuned. Everytime the car starts to spool into boost (around 3500RPM) it will back-fire .. and jerk violently.
For ignition I have: NGKZFR7's gapped to .030", Stock Distributor w/ HEI.
For fuel I have: Milli S injectors @ 70psi, 6psi WG, 255lph Walbro.
I'm not sure if loading a Datalog will help but I uploaded in case. HERE!
(I'm @5000ft, so atmosphere here is 83kPa)
Any ideas? The motor is warmed up and around 165 degrees. The car also runs fine N/A through to redline. Sorry, I don't have the AFR's yet.
For ignition I have: NGKZFR7's gapped to .030", Stock Distributor w/ HEI.
For fuel I have: Milli S injectors @ 70psi, 6psi WG, 255lph Walbro.
I'm not sure if loading a Datalog will help but I uploaded in case. HERE!
(I'm @5000ft, so atmosphere here is 83kPa)
Any ideas? The motor is warmed up and around 165 degrees. The car also runs fine N/A through to redline. Sorry, I don't have the AFR's yet.
Comment