**NCPOC FS/WTB Official Thread**

[jk_94_probe]

WTB

I'm looking for some stock PGT rims with some pretty good tread left on the tires, some lowering springs and maybe a cat-back exhaust system. If you got anything, please let me know. Thanks

[Josh_Rose]

hey guys, i'm looking for a Radiator and Radiator fan assembly for a 1st Gen LX w/ the 3.0. Mines a '91 and i'm not sure if the '90 or '92 will work but if so i will accept them.

[heresjohnny]

wtb a stock set of wheels: swirlies, 5-spokes or a good set of fd's

[mardarati]

stock swirlies avail

[heresjohnny]

any pics and how much do you want for the swirlies

[kevin0038]

Raleigh, NC
Looking to sell my green 94 PGT or part it out. The car has 145,000 on it. The transmission went bad (no 3rd or 4th gear) but the engine still runs great. The interior is great and the exterior has some very minor dings and the usual probe faded paint (better than average though). If you are interested in any parts or buying the car straight up, let me know. kmertens606@hotmail.com.

[PGTrunner]

Hey guys, I know I don't post alot on here (rarely get the time to be on here much) but I figured I'd give the local guys first dibs on a couple parts I'm reluctantly selling. I've come into a bit of financial woes and it's finally come down to me selling a few parts to make ends meet - plus these parts have been sitting a while and they deserve to be used in a good probe
First off, I'm really not wanting to ship these parts (another reason I'm starting here and not the board-wide FS forum). I'm willing to drive a couple hours and meet up. I'm up near Boone, so a couple hours driving is roughly half the state. Second, these prices are negotiable - so if you don't like the price, offer me something but please don't low ball. All parts have been taped off since bought, so no fear of dirt/trash inside. Off to the parts:

- Clutched Eaton M62
Bought this several years back for decent money. It's sat on a shelf since. Lobes are in excellent condition and will compress air with just your hand spinning it. Bearings and clutch are in excellent condition. I do believe that a gasket somewhere is slowing dying. There is some oil covering the lobes. There are rebuild kits on ebay. In light of this, I'm willing to part with it for $300 obo.
http://i51.photobucket.com/albums/f3...1764Medium.jpg

http://i51.photobucket.com/albums/f3...1766Medium.jpg

http://i51.photobucket.com/albums/f3...1765Medium.jpg

- Z31 Nissan 300ZX Garret T3 60 .63
Bought this off a friend of mine a while back. Turbo is in excellent condition. ZERO shaft play. The internal wastegate is in great shape as well. No cracks in the wastegate port. 4 bolt T3 flange. It is missing 1 bolt on the wastegate housing - but a trip to the hardware store should find a replacement. $125 obo

http://i51.photobucket.com/albums/f3...1767Medium.jpg

http://i51.photobucket.com/albums/f3...1768Medium.jpg

http://i51.photobucket.com/albums/f3...1769Medium.jpg

- 1st Gen Turbo manifold
Slightly ported on the exhaust side. It'd be a great piece to weld another turbo flange onto, as the studs are completely trashed. $25 obo

http://i51.photobucket.com/albums/f3...1771Medium.jpg

http://i51.photobucket.com/albums/f3...1770Medium.jpg

If you have questions or offers, just PM me.

[95gtLINY]

hey guys i'm looking for a set of headers for the 2.5L in a 95 pgt i'll be in the greensboro area again starting next week

[Bryan_Johnson]

I'm looking for a rebuildable CD4E transmission core for a 94-97 2.0L Probe.

[PGT Mac]

anybody got a fuel tank, or just a fuel pump assembly for a 2nd gen GT?

[ShimiShang]

anybody got a fuel tank, or just a fuel pump assembly for a 2nd gen GT?

I got one, but Im in Durham. I have both fuel pump and tank. All was working when car got parked.

[Josh_Rose]

Hey guys, its been a while since i've been on here but i need money bad to pay off some debt so i can get into the air force. Need this stuff sold ASAP.

NEEDING THIS STUFF GONE SO ALL PRICES ARE NEGOTIABLE. I WILL EVEN DROP PRICES IF MORE THAN ONE THING IS BOUGHT!

All parts are from a rio red '95 with gray interior.

Exterior

Driver Side GT Door trim - 25+shipping

'95 GT Front Bumper - 20 pick up only

Both GT Side Skirts - 30 for both or 20 each. pickup or meet (i'm willing to try to build a box to ship but no gurantees)

2 Stock '93-'94 style pass side tail lights - 15 each + shipping

Driver side Front Fender - 25 pick up or meet

Gas tank lid - 5 + shipping

front wiper motor 10 + shipping

rear wiper motor w/ blade - 10 + shipping

Both Power Mirrors - $25 + shipping

Interior

trunk and gas tank latch with cables - 10 + shipping

power door wiring harnesses - 20+shipping

crapload of other various interior parts - 20 + shipping (pm if looking for specific part)

mechanical

KLDE Motor had about 136k miles on it, ran strong when removed from car. Took heads off for a guy who wanted the block then he backed out.

Heads - $50 each or both for $80 will try to ship, pick up or meet preferred.

Block - $100 pick up only

Stock intake manifold - $45 + shipping

Stock Throttle body - $20 + shipping

Almost New Duralast Spark Plug Wires - 15 + shipping

Hood Release lever and cable - 5 + shipping

Water Pump - 25 + shipping

Distributor - $50 + shipping

2 Alternators - 25 each + shipping

Both headlight motors - $20 + shipping

Steering column w/ ignigion (key included) and headlight and wiper levers - $20 + shipping

Virtually new Harmonic balancer (put maybe 7500 miles on it) - $40 + shipping

[bulletsneverlie]

pm sent josh

[wondo]

Looking for a motor, KLO3, seems as though mine is going down the tubes. lower the miles the better. pm meh

[Pumpkin King]

Looking for a running de got anything pm me..