Need Help

[probin4life]

Does anybody know anything about these wonderful cars, to be able to come here to help me with bodywork and a few odds and ends. I live in Windsor, Pa outside Red Lion, York Co.

[diablovt6o]

What odds and ends are you talking about? Im not real good at body work, but considering I have a boosted 2nd gen, I have to know my way around these damn cars heh.... Quite a few of us live in York and the surrounding areas.

[oneslow95pgt]

yea there is a few of us

[probin4life]

What odds and ends are you talking about? Im not real good at body work, but considering I have a boosted 2nd gen, I have to know my way around these damn cars heh.... Quite a few of us live in York and the surrounding areas.

Well I need to get this car running better. I also need a catalytic converter,
and if I can get one I need a welder or straight bolt up.
My car is losing power in the lower power bands, and if you have a spring compressor so I can take my ceased up coilovers off and install my Eibach springs back on.
Any help?

[diablovt6o]

You dont need a spring compressor to take off coilovers or put on eibachs

[whiteboypgt]

hey i am in windsor all the time my gf lives out there im in york, pm me and ill give u my cell number so we can meet up. i know my way around these cars alot considering i have a 2nd gen gt boosted with more bodywork then u could even believe.

[superballs63]

where in windsor, I live in red lion, right past the "major" 4 way stop near the windsor township building. I might be able to help you with some of the bodywork

[oneslow95pgt]

kevin ur girl lives in windsor n u never stop im like a mile up the road lol but yea we all around n he has to much body work for a probe lol at least i had my tails done for me but if u need help im right in york anna bro him me up

[probin4life]

You dont need a spring compressor to take off coilovers or put on eibachs

Hows that????

hey i am in windsor all the time my gf lives out there im in york, pm me and ill give u my cell number so we can meet up. i know my way around these cars alot considering i have a 2nd gen gt boosted with more bodywork then u could even believe.

Sent you a pm. Thanx

where in windsor, I live in red lion, right past the "major" 4 way stop near the windsor township building. I might be able to help you with some of the bodywork

Right on East high st.

kevin ur girl lives in windsor n u never stop im like a mile up the road lol but yea we all around n he has to much body work for a probe lol at least i had my tails done for me but if u need help im right in york anna bro him me up

Appreciate the come back!

Hey guys thanxs for the offers. If any of you come across Andy Cook (formerly of ICE PERFORMANCE) That is the guy that ripped me off. Carbon fiber hood, Lambo door hinges, Probe Addiction projector lights, full body work with custom paint. Over $5,000 he got me for. Any help either finding him or finishing my project would be very helpful.

[oneslow95pgt]

i used to work for ice performance lol andy is a homo

[superballs63]

Hey guys thanxs for the offers. If any of you come across Andy Cook (formerly of ICE PERFORMANCE) That is the guy that ripped me off. Carbon fiber hood, Lambo door hinges, Probe Addiction projector lights, full body work with custom paint. Over $5,000 he got me for. Any help either finding him or finishing my project would be very helpful.

e-mail me some pics of your car so I can get an idea of what needs done. dan_nealy@yahoo.com is my email

[TravisWilliams_GT]

Hows that????

The eibach springs do not have an overall height past the total excursion of the strut shaft, so you can put it all together without the compression. As for removal the trick is to leave the perches in the car and unscrew the center nut. Make sure you have already removed the strut to hub 17mm bolts. It will pop at the end of the threads, just don't be under it.

[oneslow95pgt]

hahahah

[probin4life]

The eibach springs do not have an overall height past the total excursion of the strut shaft, so you can put it all together without the compression. As for removal the trick is to leave the perches in the car and unscrew the center nut. Make sure you have already removed the strut to hub 17mm bolts. It will pop at the end of the threads, just don't be under it.

Sweet!!! I didn't know that ,thanx!!!

i used to work for ice performance lol andy is a homo

Did he rip you of also?

e-mail me some pics of your car so I can get an idea of what needs done. dan_nealy@yahoo.com is my email

I'm gonna try to send pic's. I have only a cell phone pic capability. Is that ok?

[probin4life]

e-mail me some pics of your car so I can get an idea of what needs done. dan_nealy@yahoo.com is my email

For some reason I can't email you pics. I don't understand???????