If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
how to:remove and install IM, phenos, bypass tb, rear mount, rear VCG, etc.
You know what'd be pretty slick? If we had pictures of each and every step so that some of us who might not be able to find something, such as the FPR to find the vaccuum hose connected to it, can find it slightly easier. Just a thought, but that'd require a ton of pictures I bet. Maybe I'll take a ton if I actually get the balls up to pull my IM off to clean it up really nice and paint it.
First time I removed the rear mount I was pissed cause the thru bolt JUST hits the PS line as you said. I started to undo it, then stopped and changed my mind. You unbolt the mount itself and the bracket that holds it can be loosened, then the bolt has clearance to come out as I remember.
Next time I do this will be soon, but OUT of the car on my new ZE(if it ever gets here)
Nick
1993 PGT KLZE Turbo - Sold (12.9 @ 118mph)
1995 240SX RB20DET swap - Sold (330whp)
2000 Audi S4 TT - Sold (too heavy)
1995 BMW M3 - Custom made turbo kit (420whp/398wtq) Sold to pay for school
2003 VW GTI 20th Anniversary Edition - Chipped, exhaust, etc...
Did you loosen the two nuts holding the fuel line to the engine? You can safely remove them and then the line will have enough slack for you to re-attach it. This was in the outlaw engineering instructions that came with the pheno's -- worked for me.
Silver 93PGT -- 97PGTS Motor
Phenolic IM Spacers, Coned TB, Custom CAI, K&N, Catco Cat & Magnaflow Muffler. For Sale: 93 Throttle Position Sensor / 93 Intake Manifold (with VRIS butterflies) PM/Email me for details!
Originally posted by beastlx i cant find that dam hidden bold on my im. its starting to make me mad. does anyone have a pic or somthing they can show me?
crawl under your car and look up behind your engine. it's a bracket holding the back of your IM to your heads. it's just to the drivers side of the VRIS harnesses, then go down.
-Jay
ASE Master Certified
ASE L1 Advanced Engine Performance Specialist THE RACECAR daily - '95 PGT mtx stock HOW TO TEST YOUR VRIS
thanks, its getting to late tonight ill look tomarow. what do you thinkg about BECK/ARNLEY gaskets. are they cheep cork or what? they are really cheap from carparts.com
Ive went to the dark, but much faster and reliable side..... 95 SR powered 240sx.
Comment