I know the DSM guys do this, that's where i got the idea. What if you took a marker and colored over the white needle?
just wondering if anybody had tried it on a probe...
Announcement
Collapse
No announcement yet.
Ghetto colored needles
Collapse
X
-
It's been done... I used the red sharpie.. PNW member has it on sticky on the PNW site I believe.. You should try it.. it's pretty cool at night..
Last edited by 1995ProbeGT; September 2, 2005, 11:33 AM.Tyrone
'06 Honda CR-V
95ProbeGT
160K Mi. with Original Stock Tranny, Clutch & Flywheel and Some Mods... And Still running strong(sometimes)
-
Red sharpie needles
http://www.probesport.com/runningagain/DSCF0144%20(Medium).JPGChrome wheeled, fuel injected, and steppin out over the line
PRD - The original Ford Probe Aftermarket, THANK YOU FOR THE GOOD RUN
1999-2013 : 14 Years of supporting the Probe community
1997 Ford Probe GTS Turbo | 2000 Jaguar XJ8 | 1988 Jeep Grand Wagoneer | 1930 Model A Hotrod | 2005 VW Touareg V8
Comment
-
Why, yes it does. It's perfect!Originally posted by c-manyeah, boyee. Me too. It even glows red at night!
Comment
-
I've seen people paint them... not sure about a marker-Jeff,
PT's Newest Appearance Moderator
(¯`·._--={CustomProbes Gallery!!! }=--_.·`¯)
(¯`·._--={CustomProbes2 Gallery!!!}=--_.·`¯)
(¯`·._--={CustomProbes3 Gallery!!!}=--_.·`¯) NEW
Comment
-
I know people are getting sick of seeing my interior, but here ya go for an example
http://www.supermotors.org/getfile/2...ture%20146.jpgLast edited by Tweaked; September 2, 2005, 06:20 PM.ONPOC.ca Administrator
K-Series.ca Founder
1993 PGTZE, forever under construction...
Comment
-
Originally posted by TweakedI know people are getting sick of seeing my interior, but here ya go for an example
http://www.supermotors.org/getfile/2...ture%20146.jpg
Far from sick of it
-Jeff,
PT's Newest Appearance Moderator
(¯`·._--={CustomProbes Gallery!!! }=--_.·`¯)
(¯`·._--={CustomProbes2 Gallery!!!}=--_.·`¯)
(¯`·._--={CustomProbes3 Gallery!!!}=--_.·`¯) NEW
Comment
-
Mine are orange at the moment. Match my pillar gauges.
Used a Sharpie and about 2-3 passes on each needle.
Later
Wes------------------------Wes Fenton------------------------
No longer a probe owner, but I'm still a probe enthusiast!
----------I can't believe I made it to 9 Myrtles!!!----------
Comment
-
i wonder if there is a way i c can spice up my revers indiglo95 Geo Tracker - FLIPPED | 87 Nissan 200SX - SOLD | 95 Geo Prizm - 2 10"s(JUNKED) | 85 Toyota Supra - 4 10"s (JUNKED)
99 Mazda 626 - SOLD | 93 PROBE GT - kitted & BLOWN 2 pieces | 94 civic EX - SOLD | 89 Isuzu I-Mark - SOLD
| 98 Isuzu Rodeo - 2 10"s | Yamaha Maxim 650 SOLD | Honda CBR 600 F2 (DAILY RIDE) | Im a Dad
Comment
-
The needles were done using a sharpee marker in red, and the rest is done using coloured theater gels after removing the stock green tint from the reverse side of the guage face. It was a royal pain in the ass to do, but it turned out quite well IMO
Here's some more shots to give you an idea
http://www.supermotors.org/vehicles/...=24754#content
In this pic you can see the rest of the interior colour change, the Buttons below the HVAC controls were done by purchasing new bulbs from radio shack and using a stained glass spray paint that I picked up at Canadian Tire. It maches well with the rest I think.
http://www.supermotors.org/getfile/2...ture%20174.jpgLast edited by Tweaked; September 3, 2005, 12:52 PM.ONPOC.ca Administrator
K-Series.ca Founder
1993 PGTZE, forever under construction...
Comment
Comment