Announcement

Collapse
No announcement yet.

Thee NYPOC Lounge

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I wonder what'd happen if I leaned it out a little. I understand that I'd gain a bit, but how much and at what cost? I'm happy to leave it there. Considering at 19 psi it's a ****ing hair dryer and I don't have a FMIC.
    Anthony D. Christiano

    Comment


    • That's all that would happen is you'd get more power. The only adverse affect is added combustion heat due to less fuel. Lean it out to 12.0 across the board and see what it do.



      Jeremy
      83 LTD wagon "Sandra Dee": 351 Windsor, 3.73's and LSD, T5, 266whp 330ftlbs
      97 F-250 Powerstroke "Julia": S&B intake, aFe exhaust 191whp 418ftlbs
      97 Escort wagon "Klair": Version 2
      98 CBR600F3

      Comment


      • I just looked, it's around the high 10 AFR mark passed 6000. When I'm not making power anyways. It's around 11.4 when I'm making peak power from 4700-5500 or so.
        Anthony D. Christiano

        Comment


        • Sold the 2nd gen today. I am one Probe sellin fool!

          95 PGT MTX - Probezilla - Supercharged 'n Squirted ZE @ 8 psi
          93 FD - LSx 7.0L - 11.6@128.5 (w/ old rotary setup)
          89 DTM PGT - 49K ORIGINAL miles! - MINT! - Sold
          04 Subaru WRX STi - Perrin FMIC, Greddy 3.5" catback, K&N intake - 308AWHP/318AWTQ - Mustang Dyno
          Probezilla & The FD 540 RWHP/415 RWTQ @ 24.5 psi (past rotary setup)

          Comment


          • 11.4 is still rich buddy... 14.7 is stoich, but boosted cars are typically ran at 12.5. So all you're doing is throwing money out your exhaust pipe by running it that rich.



            Jeremy

            P.S. Did he give you 5 for it??
            Last edited by KLDE Wagon; March 22, 2012, 07:10 PM.
            83 LTD wagon "Sandra Dee": 351 Windsor, 3.73's and LSD, T5, 266whp 330ftlbs
            97 F-250 Powerstroke "Julia": S&B intake, aFe exhaust 191whp 418ftlbs
            97 Escort wagon "Klair": Version 2
            98 CBR600F3

            Comment


            • Good, now update your sig, fag.

              I know it's a bit rich, but I'm gonna trust him because god knows I'd **** it up on my own.
              Anthony D. Christiano

              Comment


              • Said he'd give me 5000 cash, now he texted me a minute ago saying he could only get 4900. I told him 5000, or the car stays with me...I have no *need* to sell it...

                Edit :: He just texted me back. I think he may have been playing games when he said he'd take it. He KNOWS that I told him multiple times that it's gotta be 5k or nothing at all. That was mentioned and made clear on the phone. Now he says he can get 4900 cash out of the bank, but can't come up with an extra 100 dollars?? Cmon man. Claims he is "going on vacation next week, and will let me know when he gets back." I've been in the game long enough to know what that means...I guess we'll see.

                Oh, and of course the thing started misfiring on cylinder #4 when we went for a drive last night. Told him "hang on a sec"....popped the hood, reseated that plug wire, and she started running on all 6 like a champ. If I keep the car I've really gotta do new plugs and wires...Got the plugs, need some wires...
                Last edited by TRWeiss1; March 23, 2012, 06:50 AM.
                95 PGT MTX - Probezilla - Supercharged 'n Squirted ZE @ 8 psi
                93 FD - LSx 7.0L - 11.6@128.5 (w/ old rotary setup)
                89 DTM PGT - 49K ORIGINAL miles! - MINT! - Sold
                04 Subaru WRX STi - Perrin FMIC, Greddy 3.5" catback, K&N intake - 308AWHP/318AWTQ - Mustang Dyno
                Probezilla & The FD 540 RWHP/415 RWTQ @ 24.5 psi (past rotary setup)

                Comment


                • I'm not surprised.



                  Jeremy
                  83 LTD wagon "Sandra Dee": 351 Windsor, 3.73's and LSD, T5, 266whp 330ftlbs
                  97 F-250 Powerstroke "Julia": S&B intake, aFe exhaust 191whp 418ftlbs
                  97 Escort wagon "Klair": Version 2
                  98 CBR600F3

                  Comment


                  • Me neither...Honestly, I was shocked when he said he'd take it. Shoulda known.

                    Btw, I will definitely have you powder those heatshields for me, Hiney. Don't get me wrong, the manifold paint is actually holding up great, but there's too much heat generated around that intake plumbing. I want to put the heatshields back on, but they look like shit. No major rush whatsoever, but when you do think you might be able to powder them? I can just run them the way they are for now...
                    95 PGT MTX - Probezilla - Supercharged 'n Squirted ZE @ 8 psi
                    93 FD - LSx 7.0L - 11.6@128.5 (w/ old rotary setup)
                    89 DTM PGT - 49K ORIGINAL miles! - MINT! - Sold
                    04 Subaru WRX STi - Perrin FMIC, Greddy 3.5" catback, K&N intake - 308AWHP/318AWTQ - Mustang Dyno
                    Probezilla & The FD 540 RWHP/415 RWTQ @ 24.5 psi (past rotary setup)

                    Comment


                    • I'd take the $4900. I'd prefer not lose a sale over $100.
                      Anthony D. Christiano

                      Comment


                      • Knowing CJ, it's a story anyhow.

                        Tom, I'll give you $4950... And the bidding starts!! HAHA

                        I COULD powder them now, the only problem is where our stuff is setup is a ****ing mess cause no one knows how to clean up after themselves, which is why we are moving it ASAP... Well, ASA Tim cleans out his basement, which he said he wanted to do today!



                        Jeremy
                        83 LTD wagon "Sandra Dee": 351 Windsor, 3.73's and LSD, T5, 266whp 330ftlbs
                        97 F-250 Powerstroke "Julia": S&B intake, aFe exhaust 191whp 418ftlbs
                        97 Escort wagon "Klair": Version 2
                        98 CBR600F3

                        Comment


                        • LOL...it's definitely a story. Ant, it's the principle here that counts. I told him 5k multiple times, and even at that I'm losing money on it. I don't need to sell it, and I don't need the money. And here's the thing, Ant...You don't know this guy like we do. It's most definitely some kind of story. My thoughts are that he flat out just doesn't have the money, but by saying he can come up with "most of it" it doesn't make him look as bad. Asking if I would take 4900 was just a formality. He knew that I wouldn't, but it makes him look better in the end. He claims that he's "going on vacation and spendin 4k+, doesn't have all the money for the car 'right now', etc, etc"...I'm thinking "if you're going on vacation it's obviously planned. You knew all this ahead of time, and you knew the price of the car. Why did you even waste my time?"

                          Hiney, I know you're joking, but you know I'd sell it to you in a heartbeat. In fact, I'd MUCH RATHER sell it to you than CJ, if I'm being honest. You going to be able to make it down tonight maing? I'm hoping you can stop in and have a few drinks, and maybe some food with us. Should be a good crowd, and the weather is looking nice.
                          95 PGT MTX - Probezilla - Supercharged 'n Squirted ZE @ 8 psi
                          93 FD - LSx 7.0L - 11.6@128.5 (w/ old rotary setup)
                          89 DTM PGT - 49K ORIGINAL miles! - MINT! - Sold
                          04 Subaru WRX STi - Perrin FMIC, Greddy 3.5" catback, K&N intake - 308AWHP/318AWTQ - Mustang Dyno
                          Probezilla & The FD 540 RWHP/415 RWTQ @ 24.5 psi (past rotary setup)

                          Comment


                          • I'm gonna try to. Not sure how this radio is gonna be to re-wire.



                            Jeremy
                            83 LTD wagon "Sandra Dee": 351 Windsor, 3.73's and LSD, T5, 266whp 330ftlbs
                            97 F-250 Powerstroke "Julia": S&B intake, aFe exhaust 191whp 418ftlbs
                            97 Escort wagon "Klair": Version 2
                            98 CBR600F3

                            Comment


                            • Gotcha bud. Well keep me posted...Hopin to see ya!!
                              95 PGT MTX - Probezilla - Supercharged 'n Squirted ZE @ 8 psi
                              93 FD - LSx 7.0L - 11.6@128.5 (w/ old rotary setup)
                              89 DTM PGT - 49K ORIGINAL miles! - MINT! - Sold
                              04 Subaru WRX STi - Perrin FMIC, Greddy 3.5" catback, K&N intake - 308AWHP/318AWTQ - Mustang Dyno
                              Probezilla & The FD 540 RWHP/415 RWTQ @ 24.5 psi (past rotary setup)

                              Comment


                              • I believe I've reached the 300+ whp plateau. This last revision of the map feels ****ing great. Now it's time to get a FMIC. This TMIC bullshit sucks.
                                Anthony D. Christiano

                                Comment

                                Working...
                                X