Announcement
Collapse
No announcement yet.
97 detailed
Collapse
X
-
I like the fan shroud and I like the reflector
I've debated doing that to my reflector multiple times but just decided to leave it as is.1996 Probe GT - Bought April 2010, Boosted August 2014
Fast FC04 18x9, Black Leather, King6, ADDCO, AWR, Yonaka, Quad J30s, AVC Pipes, Tial WG, Greddy BOV, Aeromotive AFPR, MS1v3
1993 Probe GT - 110k, auto, parts car
2011 Impreza Limited Hatchback - Daily, Lowered, WRX Wheels & Wing
Comment
-
Thanks guys!, I need new tires so I've been debating buying rims/tires or just new tires for the swirlies and after hydroplaning and almost wrecking it I think I'll just get new tires while I search for rims.
I fount a guy selling parts cheap and I bought that refelctor as a spare, and decided to paint it. It is cracked on the top side that is hidden by the trunk.97 pgt, manual swap, jdm lsd trans, cm stage 2 clutch, mx3 flywheel, cai
2001 626
Comment
-
Thanks!, I try to keep it clean and take care of her. but it's hard to find the time these days. I figured the pedals were going to be a pita to install, I'm waiting on a few other parts but that will happen after this weekend then I'll tackle the trans97 pgt, manual swap, jdm lsd trans, cm stage 2 clutch, mx3 flywheel, cai
2001 626
Comment
-
Thanks man!^, I've been slowly tearing this car apart each night after work, today i removed the starter. it was a pita. The passenger side axle nut wouldn't come off so I removed the hole hub, I will bring it to work to use a better impact and maybe torches. I'm hoping to pull the trans this weekend and install the clutch line, clutch master and the new brake master cylinder.97 pgt, manual swap, jdm lsd trans, cm stage 2 clutch, mx3 flywheel, cai
2001 626
Comment
-
Bravo for the determination90 Mazda 323 - KLZE, fender-flared, right hand drive, 2350 lb fully loaded sex machine. || Pic Thread ||- SOLD
93 PGT FRANKENPROBE - 10.24 @ 139.9 mph ||545 whp @ 20 psi || Timeslip || Dyno slip|| Build Thread - GONE
97 GTS - Rear Wheel Drive KLZE, 6-speed, 3.90 Torsen LSD, 2650 lb, daily driver! - Build Thread - GONE
90 Ghettocet KLiata - forever WIP
Comment
-
I have a question, I removed the flexplate and the metal adapter behind it, bolted my flywheel/clutch to the crank then I was able to slide the trans on, However it won't slide in the whole way. It stays out about a quarter inch on the bottom. any ideas as to what is holding it back?
edit, I didn't aling the clutch disc properly. problem solved.Last edited by 93pgtravis; September 24, 2013, 07:08 PM.97 pgt, manual swap, jdm lsd trans, cm stage 2 clutch, mx3 flywheel, cai
2001 626
Comment
-
I'll have to snap some of them on it this weekend, lol. I work 12 hour days between school and work and I have to reinstall the front hubs before I can put these bad boys on. but I'm hoping to make some real progress this sunday.97 pgt, manual swap, jdm lsd trans, cm stage 2 clutch, mx3 flywheel, cai
2001 626
Comment
Comment